restrict-access-order-ipv6

To create a new restrict access order or modify an existing restrict access order, use the following command:

restrict-access-order-ipv6 NUMBER

This command enters the config-ipv6-guest-restrict-access context. The following commands are available from within this context:

Syntax Description

help
Shows available commands
history
Shows a list of previously run commands.
abort
Exits the config-guest-restrict-access context without saving changes.
end
Saves changes, and then exits the config-guest-restrict-access context.
exit
Saves changes, and then exits the config-guest-restrict-access context.
quit
Exits the config-guest-restrict-access context without saving changes.
order NUMBER
Sets the guest access rule order.
description WORD
Sets the guest access rule description.
type [ allow | deny ]
Sets the guest access rule type to allow or deny.
destination [address IPv6-ADDR | port NUMBER/WORD
Sets the destination address/port of a guest access rule.
protocol NUMBER/WORD
Sets the protocol of a guest access rule.
icmpv6-type
Sets the ICMPv6 type of a Guest Access rule.
show
Displays restricted subnet access settings.

Example

ruckus(config-guest-access)# restrict-access-order-ipv6 2
ruckus(config-ipv6-guest-restrict-access)# type allow
The command was executed successfully.
ruckus(config-ipv6-guest-restrict-access)# show
          Description=
          Type= Allow
          Destination Address= Any
          Destination Port= Any
          Protocol= Any
          ICMPv6 Type= Any
ruckus(config-ipv6-guest-restrict-access)# end
The IPv6 Restricted Subnet Access entry has been added to the Guest Access.
Your changes have been saved.
ruckus(config-guest-access)#