member add mac
To add the AP to the specified AP group, use the following command:
Example
ruckus(config-apgrp)# member add mac c4:10:8a:1f:d1:f0
ruckus(config-apgrp)# show
APGROUP:
ID:
:
Name= apgroup2
Description=
Channel Range:
B/G/N= 1,2,3,4,5,6,7,8,9,10,11 (Disallowed= )
A/N Indoor= 36,40,44,48,149,153,157,161 (Disallowed= )
A/N Outdoor= 36,40,44,48,149,153,157,161 (Disallowed= )
Radio 11bgn:
Channelization= Auto
Channel= Auto
Tx. Power= Auto
11N only Mode= Auto
WLAN Group= Default
Call Admission Control= OFF
SpectraLink Compatibility= Disabled
Radio 11an:
Channelization= Auto
Indoor Channel= Auto
Outdoor Channel= Auto
Tx. Power= Auto
11N only Mode= Auto
WLAN Group= Default
Call Admission Control= OFF
SpectraLink Compatibility= Disabled
Network Setting:
Protocol mode= Use Parent Setting
Turn off channfly setting: disabled
if AP's uptime is more than 30 minutes will turn off AP's ChannelFly
Members:
MAC= c4:10:8a:1f:d1:f0
ruckus(config-apgrp)#