snmpv3-trap

To enable and configure the SNMPv3 trap parameters, use the following command:

snmpv3-trap user_name snmp_trap_server_ip [ MD5 | SHA ] auth_pass_phrase [ DES privacy_phrase |AES privacy_phrase | None ]

Syntax Description

snmpv3-trap
Enable the SNMPv3 trap and configure the trap parameters
user_name
Trap user name
snmp_trap_server_ip
Trap server IP address
[ MD5 | SHA ]
Authentication method
auth_pass_phrase
Authentication passphrase
[ DES privacy_phrase | AES privacy_phrase | None ]
Privacy method and privacy phrase

Defaults

None

Example

ruckus(config-sys)#snmpv3-trap test1234 192.168.0.22 MD5 test1234 DES test4321 
The command was executed successfully.