model

To configure model-specific settings for all APs of a certain model within an AP group, use the following command:

model <WORD> <arguments>

Syntax Description

model
Configure AP group model-specific settings
<WORD>
Enter the AP model name.
port-setting
Configures the port setting for the specified AP model. Enters config-apgrp-port context. See port-setting for more information.
status-leds
Configures the status LEDs for the specified AP model (enable, disable).
usb-port
Configures the USB port settings for the AP model (enable, disable).
external-antenna
Configures external antenna settings. See external-antenna.
max-clients NUMBER
Sets the maximum clients for the AP.
usb-software VID-PID-VERSION
Selects the USB Software Vendor ID, Product ID and version for the AP.
poe-out
Configures the PoE Out ports for the specified AP model (enable, disable).
internal-heater
Configures the internal heater for the specified AP model (enable, disable).
cband-channels
Configures the C-band (5.8 GHz) channels for the specified AP model (enable, disable). (UK country code only)
cband-license
Enable or disable 5.8 GHz Channels License for the specified AP model.
lacp-status
Configure LACP status for the specified AP model.
power-mode
Sets the PoE mode for the specified AP model.
802.3af-txchain
Sets the 2.4GHz radio transmit chains in 802.3af PoE mode for the specified AP model.

Defaults

Status LEDs: Enabled

PoE Out: Disabled

USB Software: Disabled

Internal Heater: Disabled

C-band channels: Disabled

C-band license: Disabled

LACP status: Disabled

Power mode: Varies by AP model

USB Ports: Enabled

Power Mode: Default

802.3af-txchain: Varies by AP model

Example

ruckus(config-apgrp)# model R610 status-leds enable
ruckus(config-apgrp)# end
The AP group 'System Default' has been updated.
Your changes have been saved.
ruckus(config)#