show l3acl-ipv6 name

To display the settings of a specific IPv6 L3 ACL rule that has been added to the controller, use the following command:

show l3acl-ipv6 name WORD

Syntax Description

show
Display information
l3acl
Display L3 ACL information
l3acl-ipv6
Display IPv6 L3 ACL information
name
Display information about the specified L3 ACL rule
WORD
Name of the L3 ACL rule

Defaults

None.

Example

ruckus# show l3acl name test2
L3/L4/IP ACL:
ID:
4:
Name= test2
Description= test2
Default Action if no rule is matched= Allow all by default
Rules:
Order= 1
Description=
Type= Allow
Destination Address= Any
Destination Port= 53
Protocol= Any
Order= 2
Description=
Type= Allow
Destination Address= Any
Destination Port= 67
Protocol= Any
Order= 3
Description=
Type= Allow
Destination Address= 8.8.8.8/24
Destination Port= 25
Protocol= 6