show l3acl-ipv6 all
To display all IPv6 Layer 3 access control list (ACL) rules that have been added to the controller and their settings, use the following command:
Syntax Description
Defaults
None.
Example
ruckus# show l3acl all L3/L4/IP ACL: ID: 4: Name= test2 Description= test2 Default Action if no rule is matched= Deny all by default Rules: Order= 1 Description= Type= Allow Destination Address= Any Destination Port= 53 Protocol= Any Order= 2 Description= Type= Allow Destination Address= Any Destination Port= 67 Protocol= Any Order= 3 Description= Type= Allow Destination Address= 8.8.8.8/24 Destination Port= 25 Protocol= 6