show ap
To display AP information for all APs, use the following command:
Syntax Description
Example
ruckus(debug)# show ap
AP:
ID:
1:
MAC Address= 44:1e:94:1b:f0:d0
Model= r510
Approved= Yes
Device Name= RuckusAP
Description=
Location=
GPS=
CERT = Normal
Bonjour-policy=
Bonjour-fencing=
Group Name= System Default
Channel Range:
A/N= 36,40,44,48,149,153,157,161 (Disallowed= )
B/G/N= 1,2,3,4,5,6,7,8,9,10,11 (Disallowed= )
Radio a/n:
Channelization= Auto
Channel= Auto
WLAN Services enabled= Yes
Tx. Power= Auto
WLAN Group Name= Default
Call Admission Control= OFF
Protection Mode= Auto
Radio b/g/n:
Channelization= Auto
Channel= Auto
WLAN Services enabled= Yes
Tx. Power= Auto
WLAN Group Name= Default
Call Admission Control= OFF
Protection Mode= 2
Override global ap-model port configuration= No
Network Setting:
Protocol mode= Use Parent Setting
Device IP Settings= Keep AP's Setting
IP Type= DHCP
IP Address= 192.168.0.10
Netmask= 255.255.255.0
Gateway= 192.168.0.1
Primary DNS Server=
Secondary DNS Server=
Device IPv6 Settings= Keep AP's Setting
IPv6 Type= Auto Configuration
IPv6 Address= ::461e:98ff:fe1b:f0d0
IPv6 Prefix Length= 64
IPv6 Gateway=
IPv6 Primary DNS Server=
IPv6 Secondary DNS Server=
Mesh:
Mode= Use Parent Setting
max hops= Use Parent Setting
LLDP:
Status = Use Parent Setting
LAN Port:
0:
Interface= eth0
Dot1x= None
LogicalLink= Up
PhysicalLink= Up 10Mbps full
Label= 10/100/1000 PoE LAN1
1:
Interface= eth1
Dot1x= None
LogicalLink= Down
PhysicalLink= Down
Label= 10/100/1000 LAN2
2:
MAC Address= d4:c2:9e:35:c9:50
Model= r610
Approved= Yes
Device Name= RuckusAP
Description=
Location=
GPS=
CERT = Normal
Bonjour-policy=
Bonjour-fencing=
Group Name= System Default
Channel Range:
A/N= 36,40,44,48,149,153,157,161 (Disallowed= )
B/G/N= 1,2,3,4,5,6,7,8,9,10,11 (Disallowed= )
Radio a/n:
Channelization= Auto
Channel= Auto
WLAN Services enabled= Yes
Tx. Power= Auto
WLAN Group Name= Default
Call Admission Control= OFF
Protection Mode= Auto
Radio b/g/n:
Channelization= Auto
Channel= Auto
WLAN Services enabled= Yes
Tx. Power= Auto
WLAN Group Name= Default
Call Admission Control= OFF
Protection Mode= 2
Override global ap-model port configuration= No
Network Setting:
Protocol mode= Use Parent Setting
Device IP Settings= Keep AP's Setting
IP Type= DHCP
IP Address= 192.168.0.3
Netmask= 255.255.255.0
Gateway= 192.168.0.1
Primary DNS Server=
Secondary DNS Server=
Device IPv6 Settings= Keep AP's Setting
IPv6 Type= Auto Configuration
IPv6 Address= ::d6c1:9eff:fe35:c950
IPv6 Prefix Length= 64
IPv6 Gateway=
IPv6 Primary DNS Server=
IPv6 Secondary DNS Server=
Mesh:
Mode= Use Parent Setting
max hops= Use Parent Setting
LLDP:
Status = Use Parent Setting
LAN Port:
0:
Interface= eth0
Dot1x= None
LogicalLink= Up
PhysicalLink= Up 1000Mbps full
Label= 10/100/1000 PoE LAN1
1:
Interface= eth1
Dot1x= None
LogicalLink= Down
PhysicalLink= Down
Label= 10/100/1000 LAN2
PoE Mode= Auto
802.3af PoE Tx. chain= 2
ruckus(debug)#