show ap devname
To display information about a specific device using its device name, use the following command:
Syntax Description
Defaults
None.
Example
ruckus# show ap devname "7962 - MAP" AP: ID: 1: MAC Address= 04:4f:aa:0c:b1:00 Model= zf7962 Approved= Yes Device Name= 7962 - MAP Description= 7962 MAP (Living Room) Location= Living Room GPS= Group Name= System Default Radio a/n: Channelization= Auto Channel= Auto WLAN Services enabled= Yes 5.8GHz Channels = Disabled Tx. Power= Auto WLAN Group Name= Default Radio b/g/n: Channelization= Auto Channel= Auto WLAN Services enabled= Yes 5.8GHz Channels = Disabled Tx. Power= Auto WLAN Group Name= Default Override global ap-model port configuration= No Network Setting: Protocol mode= IPv4 and IPv6 Device IP Settings= Keep AP's Setting IP Type= DHCP IP Address= 192.168.11.6 Netmask= 255.255.255.0 Gateway= 192.168.11.1 Primary DNS Server= Secondary DNS Server= Device IPv6 Settings= Keep AP's Setting IPv6 Type= Auto Configuration IPv6 Address= fc00::1 IPv6 Prefix Length= 7 IPv6 Gateway= IPv6 Primary DNS Server= IPv6 Secondary DNS Server= Mesh: Status= Enabled Mode= Auto Uplink: Status= Smart ruckus#