auto-adjust-ap-channel radio-2.4 To enable automatically adjusting the AP 2.4 GHz radio channel when interference is detected, use the following command: auto-adjust-ap-channel radio-2.4 Syntax Description auto-adjust-ap-channel Enable the auto adjustment of the AP radio channel. radio-2.4 Enable the auto adjustment of the AP radio channel on the 2.4 GHz radio. Defaults Enabled. Example ruckus(config-services)# auto-adjust-ap-channel radio-2.4 The command was executed successfully. ruckus(config-services)# In this section: no auto-adjust-ap-channel radio-2.4 Parent topic: Configure Services Commands