zone - RUCKUS Networks Documentation

Commands related to device(config-zone)

Syntax and Type	Parameters (if any)	Description
device(config-zone)# aaa	name	Creates or updates the AAA server configuration.
device(config-zone)# adj-threshold	2.4g${value} 5g${value} Value is minimum = 1 and maximum = 100	Sets the adjacent radio threshold of the client load balancing.
device(config-zone)# ap-firmware	ap-firmware	Sets the AP firmware.
device(config-zone)# ap-group	name	Creates or updates the AP group configuration.
device(config-zone)# ap-ip-mode	[ipv4\|ipv6\|dual]	Sets the AP IP mode to either IPv4 or IPv6.
device(config-zone)# ap-logon	logon-id	Sets the login ID for the AP administrator.
device(config-zone)# ap-mgmt-vlan	lvlanTag: VLAN Tag (1-4094); enter ‘keep’to keep APs setting.	Sets the AP management VLAN.
device(config-zone)# ap-model	name	Sets the AP model configuration.
device(config-zone)# ap-password		Sets the password for the AP administrator.
device(config-zone)# ap-ping-latency-interval	enable disable	Sets the AP latency detection by enabling or disabling the AP ping.
device(config-zone)# ap-reboot-timeout	default-gateway[ hours and minutes ] : Sets the default gateway timeout in hours and minutes. control-interfacehours : Sets the control interface timeout in hours.	Sets the AP reboot timeout.
device(config-zone)# ap-registration-rule	priority	Creates or updates the AP registration rule configuration.
device(config-zone)# ap-snmp-options		Sets the AP SNMP options.
device(config-zone)# background-scan	2.4gseconds 5gseconds	Sets the background scanning.
device(config-zone)# band-balancing	2.4gint2.4g 2.4G band int: Percentage of clients on 2.4G band	Sets the band balance.
device(config-zone)# block-client	mac: Client MAC Address	Sets to block clients.
ruckus(config-zone)# bonjour-fencing	name	Bonjour Fencing provides a mechanism to limit the scope of Bonjour (mDNS) service discovery in the physical/spatial domain.
ruckus(config-zone)# bonjour-fencing-policy	name	Creates or updates the bonjour fencing policy.
device(config-zone)# bonjour-gateway		Enables the bonjour gateway.
device(config-zone)# bonjour-policy	name	Creates or updates the bonjour policy.
device(config-zone)# channel	2.4gchannel 5g indoor channel 5g outdoor channel	Sets the channel.
device(config-zone)# channel-evaluation-interval	seconds: The interval value (Range:60~3600 sec)	Sets the channel evaluation interval.
device(config-zone)# channel-range	2.4g[channel \|all] 5g indoor[channel \|all] 5g outdoor[channel \|all]	Sets the channel range.
device(config-zone)# channel-select-mode	2.4g${value} 5g${value}	Set a mode to automatically adjust AP channels.
device(config-zone)# channelfly-mtbc	2.4gnumber: MTBC value (Range: 100~1440) 5gnumber	Sets the MTBC value of ChannelFly.
device(config-zone)# channelization	2.4g[20\|40] 5g[40\|20]	Sets the channelization.
device(config-zone)# client-admission-control	2.4g 5g 2.4gminClientCountminClientCount 2.4gmaxRadioLoadmaxRadioLoad 2.4gminClientThroughputminClientThroughput5gminClientCountminClientCount 5gmaxRadioLoadmaxRadioLoad 5gminClientThroughputminClientThroughput	Enables the client admission control.
device(config-zone)# client-isolation-whitelist	name: Client isolation whitelist name	Creates or updates the client isolation whitelist.
device(config-zone)# country-code	country-code	Sets the country code.
device(config-zone)# description	text	Sets the description,
device(config-zone)# device-policy	name	Sets the device policy.
device(config-zone)# dfs-channel		Enable DFS channels for the US country code.
device(config-zone)# diffserv	name	Creates or updates the diff server profile.
device(config-zone)# dos-protection	dosBarringPeriod : DoS protection period dosBarringThreshold : DoS protection threshold dosBarringCheckPeriod : DoS protection checkperiod	Enables DoS (Denial-of-service) protection.
device(config-zone)# ethernet-port-profile	name	Sets the Ethernet Port profile.
device(config-zone)# gps	latitudelongitude	Displays the help.
device(config-zone)# gps-altitude	altitude[floor\|meters] altitude value floor meters	Sets the GPS altitude.
device(config-zone)# guest-access	name	Sets the guest access.
device(config-zone)# headroom	2.4gclient 5g: 5 GHz radio	Sets the headroom (# of clients) of client load balancing.
device(config-zone)# hotspot	name	Creates or updates the WISPr hotspot configuration.
device(config-zone)# hotspot20-venue-profile	name	Creates or updates the venue profile for hotspot release 2 configuration.
device(config-zone)# hotspot20-wlan-profile	name	Creates or updates the WLAN profile for hotspot release 2 configuration.
device(config-zone)# indoor-channel		Enables the indoor channels.
device(config-zone)# ipsec-profile	profile-name	Sets the IPsec profile.
device(config-zone)# ipsec-tunnel-profile	${value}	Sets the IPsec Tunnel Profile.
device(config-zone)# l2-acl	name	Sets the layer 2 access control list.
device(config-zone)# lbs		Enables the location based service.
device(config-zone)# lbs-service		Sets the location based service.
device(config-zone)# load-balancing	2.4g 5g	Sets the client load balancing.
device(config-zone)# location	text	Sets the location.
device(config-zone)# location-additional-info	text	Sets the additional information location.
device(config-zone)# mesh		Enables mesh networking.
device(config-zone)# mesh-name	name	Sets the mesh name (ESSID).
device(config-zone)# mesh-passphrase	mesh-passphrase	Sets the mesh passphrase.
device(config-zone)# move	domainname	Moves the zone to another domain.
device(config-zone)# name	name	Sets the AP zone name.
device(config-zone)# no	aaa name ap-group name ap-registration-rule priority background-scan 2.4g 5g band-balancing block-client bonjour-fencing bonjour-fencing-policy bonjour-gateway bonjour-policy channel-select-mode 2.4g 5g client-admission-control 2.4g 5g client-isolation-whitelist description device-policy dfs-channel diffserv dos-protection dosBarringPeriod ethernet-port-profile gps gps-altitude altitude guest-access hotspot name hotspot20-venue-profile name hotspot20-wlan-profile name indoor-channel ipsec-profile l2-acl lbs load-balancing location location-additional-info mesh protection-mode roam smart-mon smart-roam-disconnect-event soft-gre-profiles syslog-enabled syslog-facility syslog-ip syslog-ip6 syslog-port syslog-priority	Disables and deletes command configuration.
device(config-zone)# no	timezone timezone-dst timezone-dst timezone-gmt-offset tunnel-profile tunnel-type tx-power venue-codename venue-profile vlan-overlapping weak-bypass web-authentication wechatname wlan name wlan-group name wlan-scheduler name	Disables and deletes command configuration.
device(config-zone)# node-affinity-profile	profile-name	Sets the node affinity profile
device(config-zone)# protection-mode	2.4g ${value}	Overrides the protection mode on 2.4 GHz radio
device(config-zone)# recovery-ssid-enabled	disable	Overrides the enable recovery SSID broad case.
device(config-zone)# rks-gre-profile	profile-name	Sets the AP Ruckus GRE tunnel profile.
device(config-zone)# roam	2.4g 5g	Sets the smart roam.
device(config-zone)# roam-macfilt-time	2.4g seconds (0-600) 5g seconds (0-600)	Sets the smart roam MAC filter time in seconds. The default value is 15 seconds. This configuration is only available at the Zone level.
device(config-zone)# rogue-ap-detection	[disable\|enable ] : Disables or enables rogue access points report-all[disable\|enable ]: Enables or disables all rogue devices report-only-malicious[ enable\|disable ]: Enables or disables only malicious rogue device types report-ssid-spoofing [ disable\|enable]: Enables or disables malicious rogue devices which have SSID spoofing	Sets the report rogue access point.
device(config-zone)# rogue-ap-detection	report-same-network [enable\|disable]: Enables or disables malicious rogue devices which have same network report-mac-spoofing[ disable\|enable ]: Enables or disables malicious rogue devices which have MAC IP address spoofing protect-from-malicious [ disable\|enable]: Enables or disables the network from malicious rogue access points	Sets the report rogue access point.
device(config-zone)# secondary-channel	5g indoor [Secondary channel] 5g outdoor[Secondary channel]	Sets the secondary channel.
device(config-zone)# smart-mon	intervalvalue thresholdvalue	Sets the smart monitor interval.
device(config-zone)# smart-roam-disconnect-event		Enables smart roam disconnect event.
device(config-zone)# soft-gre-profiles	<profile-name> <profile-name> <profile-name> - Select the first, second and third SoftGRE tunnel profile <profile-name> <profile-name> - Select the first and second SoftGRE tunnel profile <profile-name> - Select the first SoftGRE tunnel profile	Sets AP SoftGRE tunnel profiles
device(config-zone)# syslog-enabled		Enables the external syslog server for APs for the specified zone.
device(config-zone)# syslog-facility	[Local6\|Keep Original \|Local0\|Local5\|Local7\|Local1\|Local4\|Local3\|Local2]	Sets the syslog server facility,
device(config-zone)# syslog-ip	ip	Sets the IP address for the syslog server.
device(config-zone)# syslog-ip6	ipv6	Sets the IPv6 address for the syslog server.
device(config-zone)# syslog-port	port	Sets the port number for the syslog server.
device(config-zone)# syslog-priority	[Alert\|Info\|Critical\|Warning\|Notice\|Emergency\|All\|Error]	Sets the syslog server priority.
device(config-zone)# timezone	System : Follows the controller time zone setting System[time zone] Select the time zone from system database User-defined[time zone abbr.] User defined time zone Time zone abbreviation (example: GMT, CST, EST)	Sets the timezone for zone.
device(config-zone)# timezone-dst	[ Start \|End ] orderweekdaymonthhour	Sets the user defined timezone for daylight savings.
device(config-zone)# timezone-gmt-offset	[ hour \| hour:] minute: For example, 8, -7:45	Sets the user defined timezone for GMT offset.
device(config-zone)# tunnel-profile	profile-name	Sets the AP GRE tunnel profile.
device(config-zone)# tunnel-type	[gre\|gre-udp]	Sets the tunnel type.
device(config-zone)# tx-power	2.4g${value} 5g${value} Value is minimum = 1 and maximum = 100	Sets the TX power adjustment.
device(config-zone)# usb-software	uploadftp-url	Sets the AP USB software package.
device(config-zone)# venue-code	codeVenue Code	Sets the venue code.
device(config-zone)# venue-profile	name	Sets the venue profile.
device(config-zone)# vlan-overlapping		Enables the overlapping of VLAN pooling.
device(config-zone)# vlan-pooling	name	Creates or updates the VLAN pooling profile.
device(config-zone)# weak-bypass	2.4g${value} 5g${value} Value is minimum = 1 and maximum = 100	Sets the weak bypass threshold of the client load balancing.
device(config-zone)# web-authentication	name	Sets the web authentication.
device(config-zone)# wechat	name: WeChat name	Create/update WeChat configuration.
device(config-zone)# wlan	name	Creates or updates the WLAN/ ESSID configuration.
device(config-zone)# wlan-group	name	Creates or updates the WLAN group configuration.
device(config-zone)# wlan-scheduler	name	Creates or updates the WLAN scheduler configuration.

Commands related to device(config-zone-aaa)

Syntax and Type	Parameters (if any)	Description
device(config-zone-aaa)# admin-domain		Enables the admin domain name.
device(config-zone-aaa)# admin-domain-name	admin-domain	Creates or updates the admin domain.
device(config-zone-aaa)# admin-password	admin-password	Creates or updates the admin password.
device(config-zone-aaa)# backup	ipip ipv6ipv6 portport shared-secretshared-secret	Enables backup of RADIUS support and set related settings.
device(config-zone-aaa)# base-domain	base-domain	Set the base domain.
device(config-zone-aaa)# description	description	Sets the description.
device(config-zone-aaa)# global-catalog		Enables the global catalog support.
device(config-zone-aaa)# ip	ip	Set IP addresses of primary RADIUS server.
device(config-zone-aaa)# ip6	ipv6	Set IPv6 addresses of primary RADIUS server.
device(config-zone-aaa)# key-attribute	key-attribute	Sets the key attributes for the primary RADIUS server.
device(config-zone-aaa)# no	backup global-catalog	Disables or deletes configuration settings.
device(config-zone-aaa)# password	password	Sets the password for the primary RADIUS server.
device(config-zone-aaa)# port	port	Sets the port number of the primary RADIUS server.
device(config-zone-aaa)# search-filter	search-filter	Sets the search filter.
device(config-zone-aaa)# shared-secret	shared-secret	Sets the shared secret of the primary RADIUS server.
device(config-zone-aaa)# test	usernamepassword[PAP\|CHAP]	Tests the RADIUS server based on the user credentials and protocol settings.
device(config-zone-aaa)# test-acct		Tests the accounting server.
device(config-zone-aaa)# type	[radius\|radius-acct\|LDAP\|AD]	Sets the RADIUS type.
device(config-zone-aaa)# windows-domain	windows-domain	Sets the windows domain name.

Commands related to device(config-zone-ap-group)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-group)# ani-ofdm-level	ap-mode: AP model name	Sets the AP adaptive noise immunity level for specific AP model.

device(config-zone-ap-group)# ap-snmp-options		Enables AP SNMP options.
device(config-zone-ap-group)# channel	2.4g${value} 5g indoor ${value} 5g outdoor ${value}	Sets the channel.
device(config-zone-ap-group)# channel-evaluation-interval	seconds: The interval value (60~3600 secs)	Sets the channel evaluation interval.
device(config-zone-ap-group)# channel-range	2.4g[channels \|all]: 2.4GHz radio 5g indoor [channels \|all]: 5GHz radio 5g outdoor[channels \|all]: 5GHz radio	Set channel range.
device(config-zone-ap-group)# channel-select-mode	2.4g${value}: 2.4GHz radio 5g${value}: 5GHz radio	Automatically adjusts the AP channels.
device(config-zone-ap-group)# channelfly-mtbc	2.4g${number}: 2.4GHz radio number: MTBC value range:100-1440 5g${number}: 5Hz radio number: MTBC value range:100-1440	Set MTBC value of Channelfly.
device(config-zone-ap-group)# channelization	2.4g[20\|40] 5g[40\|20]	Sets the channelization.
device(config-zone-ap-group)# client-admission-control	2.4gminClientThroughputminClientThroughput: Min Client Throughput (Default: 0.0Mbps) 5gminClientCountminClientCount Min Client Count (Default: 20) 5gmaxRadioLoadmaxRadioLoad Max Radio Load (Default: 75%) 5gminClientThroughputminClientThroughput Min Client Throughput (Default: 0.0Mbps)	Enables the client admission control.
device(config-zone-ap-group)# description	text	Sets the description.
device(config-zone-ap-group)# external-antenna	ap-model5g[disable\|enable] ap-model5ggaingain ap-model2.4ggaingain ap-model2.4g[enable\|disable] ap-modelgaingain ap-model[disable\|enable] ap-model2.4g[3-antennas\|2-antennas] ap-model5g[3-antennas\|2-antennas]	Sets the external antenna for specific AP model.
device(config-zone-ap-group)# gps	latitudelongitude	Displays the help.
device(config-zone-ap-group)# gps-altitude	altitude[ floor\|meters]	Sets the GPS altitude.
device(config-zone-ap-group)# internal-heater	ap-model[enable\|disable]	Sets the internal heater for specific AP model.
device(config-zone-ap-group)# lbs		Enables the location based service.
device(config-zone-ap-group)# lbs-service		Sets the location based service.
device(config-zone-ap-group)# led-mode	ap-model	Sets the LED mode for specific AP model.
device(config-zone-ap-group)# lldp	ap-model[enable\|disable]	Sets the LLDP for a specific AP model.
device(config-zone-ap-group)# location		Sets the location.
device(config-zone-ap-group)# location-additional-info	text	Sets the additional information location.
device(config-zone-ap-group)# member	addap-mac move-toapgroup-nameap-mac removemac	Sets the AP group member. It adds a new access point to current AP group. The AP Mac address removes the access point from the current AP group and moves it to other AP group.
device(config-zone-ap-group)# no	ani-ofdm-level channel2.4g channel5gindoor channel5goutdoor channel-evaluation-interval channel-select-mode channel-range channelization2.4g channelization5g client-admission-control description external-antennaap-model5g external-antennaap-model2.4g gps internalheater lbs led-mode lldp location location-additional-info	Disables / deletes the configuration settings.
device(config-zone-ap-group)# no	override-ap-mgmt-vlan override-ap-snmp-options override-channel-select-mode override-client-admission-control override-lbs override-zone-location override-zone-location-additional-info poe-operating-mode poe-out port-setting protection-mode <2.4g> radio-band recovery-ssid secondary-channel status-leds tx-power2.4g tx-power 5g usb-port usb-software venue-code venue-profile wlan-group2.4g wlan-group5g	Disables / deletes the configuration settings.
device(config-zone-ap-group)# override-ap-mgmt-vlan	vlanTag	Overrides the AP Management VLAN.
device(config-zone-ap-group)# override-ap-snmp-options		Overrides the AP SNMP options.
device(config-zone-ap-group)# override-channel-select-mode	2.4g 5g	Overrides auto channel selection mode and ChannelFly MTBC.
device(config-zone-ap-group)# override-client-admission-control	2.4g 5g	Overrides the client admission control settings.
device(config-zone-ap-group)# override-lbs		Overrides the location based service to zone settings.
device(config-zone-ap-group)#override-venue-code		Overrides the zone's venue code .
device(config-zone-ap-group)# override-zone-location		Overrides the zone location setting.
device(config-zone-ap-group)# override-zone-location-additional-info		Overrides the zone location additional information setting.
device(config-zone-ap-group)# poe-operating-mode	ap-model: AP model name	Switches the PoE Operating Mode for specific AP model
device(config-zone-ap-group)# poe-out	ap-model[enable\|disable]	Sets the PoE out port for a specific AP model.
device(config-zone-ap-group)# port-setting	ap-model	Sets the port settings for specific AP model.
device(config-zone-ap-group)# protection-mode	2.4g ${value}	Overrides the protection mode on 2.4 GHz radio
device(config-zone-ap-group)# radio-band	ap-model[2.4g\|5g]	Switches the radio band for a specific AP model.
device(config-zone-ap-group)# recovery-ssid	enabled \| disable	Enables or disables the recovery SSID broad case.
device(config-zone-ap-group)# secondary-channel	5g indoor [secondary channel] 5g outdoor [secondary channel]	Sets the secondary channel.
device(config-zone-ap-group)# status-leds	ap-model[enable\|disable]	Sets the status LED for specific AP model.
device(config-zone-ap-group)# tx-power	2.4g${value} 5g${value}	Sets the TX power adjustment.
device(config-zone-ap-group)# usb-port	ap-model[disable\|enable]	Sets the USB port for a specific AP model.
device(config-zone-ap-group)# usb-software	ap-model:AP model name	Sets AP USB software package for a specific AP model
device(config-zone-ap-group)# venue-code		Sets the venue code.
device(config-zone-ap-group)# venue-profile	name: Venue profile	Sets the venue profile.
device(config-zone-ap-group)# wlan-group	2.4g 5g	Sets the WLAN group configurations.

Commands related to device(config-zone-ap-snmp-options configuration)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-snmp-options)# ap-snmp		Enables AP SNMP.
device(config-zone-ap-snmp-options)# no	ap-snmpname snmp-v2-communityname snmp-v3-username	Disables the settings that have been configured with these commands.
device(config-zone-ap-snmp-options)# snmp-v2-community	name	Adds or updates the AP SNMPv2 community.
device(config-zone-ap-snmp-options) # snmp-v3-user	name	Adds or updates the AP SNMPv3 user.

Commands related to device(config-zone-ap-snmp-options-snmp-v2-community configuration)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-snmp-options-snmp-v2-community)# no	notification notification-target read write	Disables the settings that have been configured with these commands.
device(config-domain-zone-ap-snmp-options-snmp-v2-community)# notification		Enable notification privilege
device(config-domain-zone-ap-snmp-options-snmp-v2-community)# notification-target		Enable notification target configuration commands.
device(config-domain-zone-ap-snmp-options-snmp-v2-community)# notification-type		Sets the notification type
device(config-domain-zone-ap-snmp-options-snmp-v2-community)# read		Enable the read privilege.
device(config-domain-zone-ap-snmp-options-snmp-v2-community)# write		Enable the write privilege.

Commands related to device(config-zone-ap-snmp-options-snmp-v3-user configuration)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-snmp-options-snmp-v3-user)# auth		Sets SNMPv3 user authentication.
device(config-zone-ap-snmp-options-snmp-v3-user)# no	notification’ notification-target read write snmp-v3-username	Disables the settings that have been configured with these commands.
device(config-zone-ap-snmp-options-snmp-v3-user)# notification		Enable notification privilege.
device(config-zone-ap-snmp-options-snmp-v3-user)# notification-target		Enable notification target configuration commands.
device(config-zone-ap-snmp-options-snmp-v3-user)# notification-type		Sets the notification type
device(config-zone-ap-snmp-options-snmp-v3-user)# privacy	none desprivacy-phrase: DES privacy phrase.	Set SNMPv3 user privacy.
device(config-zone-ap-snmp-options-snmp-v3-user)# read		Enable the read privilege.
device(config-zone-ap-snmp-options-snmp-v3-user)# write		Enable the write privilege.

Commands related to device(config-zone-ap-group lldp)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-group-lldp)# lldp-ad-interval	seconds	Sets the LLDP advertise interval in seconds from the range 1 to 300.
device(config-zone-ap-group-lldp)# lldp-hold-time	seconds	Sets the LLDP hold time in seconds from the range 60 to 1200.
device(config-zone-ap-group-lldp)# lldp-mgmt		Enables the LLDP management IP TLV.

Commands related to device(config-zone-ap-group-port-setting)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-group-port-setting)# lan	port portuplink[general\|access\|trunk] portuntagvlan portmembervlan-members portdot1x[auth-mac-based\|disabled\|auth-port-based\|supplicant]	Enables or disable specific port.
device(config-zone-ap-group-port-setting)# no	lanport	Disables or deletes the configuration settings.

Syntax and Type

Parameters (if any)

Description

device(config-zone-ap-group-port-setting)# lan

port

portuplink[general|access|trunk]

portuntagvlan

portmembervlan-members

portdot1x[auth-mac-based|disabled|auth-port-based|supplicant]

Enables or disable specific port.

device(config-zone-ap-group-port-setting)# no

lanport

Disables or deletes the configuration settings.

Commands related to device(config-zone-ap-model)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-model)# ext-ant	2.4gnumber 2.4gnumber[3\|2] 5gnumber 5ggnumber[2\|3]	Sets the external antenna.
device(config-zone-ap-model)# internal-heater		Enables international heater.
device(config-zone-ap-model)# lan1 device(config-zone-ap-model)# lan2 device(config-zone-ap-model)# lan3 device(config-zone-ap-model)# lan4 device(config-zone-ap-model)# lan5		Sets the LAN configurations from 1 to 5.
device(config-zone-ap-model)# led		Enables the status of led.
device(config-zone-ap-model)# led-mode		Sets the led mode description
device(config-zone-ap-model)# lldp		Enables the Link Layer Discovery Protocol (LLDP).
device(config-zone-ap-model)# lldp-ad-interval	seconds	Sets the LLDP advertise interval.
device(config-zone-ap-model)# lldp-hold-time	seconds	Sets the LLDP hold time.
device(config-zone-ap-model)# lldp-mgmt		Enables the LLDP management IP TLV.
device(config-zone-ap-model)# no	ext-ant internal-heater lan1 lan2 lan3 lan4 lan5 led lldp lldp-mgmt poe-operating-mode poe-out-port radio-band usb- usb-software	Disables or deletes the settings that have been configured.
device(config-zone-ap-model)# poe-operating-mode	${value}	Switches the PoE mode
device(config-zone-ap-model)# poe-out-port		Enables the PoE out port
device(config-zone-ap-model)# radio-band	${value}	Switches the radio band for a specific AP model.
device(config-zone-ap-model)# usb	port	Enables USB port.
device(config-zone-ap-model)# usb-software		Sets AP USB software package.

Commands related to device(config-zone-ap-model-lan1)

Syntax and Type	Parameters (if any)	Description
device(config-domain-zone-ap-model-lan1)# profile	profile	Sets the Ethernet Port profile. By default the access port or default trunk port (LAN) or default trunk port (WAN).

Commands related to device(config-zone-ap-registration-rule)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ap-registration-rule)# description	text	Sets the description.
device(config-zone-ap-registration-rule)# type gps	latitudelongitudedistance	Sets the GPS coordinates.
device(config-zone-ap-registration-rule)# type ip-range	ipip	Sets the IP address range from and to IP address.
device(config-zone-ap-registration-rule)# type provision-tag	tag	Sets the provision tags.
device(config-zone-ap-registration-rule)# type subnet	ipmask	Sets the subnet IP address and subnet mask.
device(config-zone-ap-registration-rule)# type	[gps\|provision-tag\|ip-range\|subnet]	Sets the rule type.

Commands related to device(config-zone-block-client)

Syntax and Type	Parameters (if any)	Description
device(config-zone-block-client)# description	text	Sets the description. .

Commands related to device(config-zone-bonjour-fencing-policy)

Syntax and Type	Parameters (if any)	Description
device(config-zone- bonjour-fencing-policy)# description	text	Sets the description.
device(config-zone- bonjour-fencing-policy)# no	description rulerule index	Sets to delete sub commands.
device(config-zone- bonjour-fencing-policy)# rule	index: rule index	Sets the bonjour fencing rule.

Syntax and Type

Parameters (if any)

Description

device(config-zone- bonjour-fencing-policy)# description

text

Sets the description.

device(config-zone- bonjour-fencing-policy)# no

description

rulerule index

Sets to delete sub commands.

device(config-zone- bonjour-fencing-policy)# rule

index: rule index

Sets the bonjour fencing rule.

Commands related to device(config-zone-bonjour-fencing-policy-rule)

Syntax and Type	Parameters (if any)	Description
device(config-zone-bonjour-fencing-policy-rule)# closest-ap	<text>	Sets the configuration to the closest AP.
device(config-zone-bonjour-fencing-policy-rule)# description	<text>	Sets the description.
device(config-zone-bonjour-fencing-policy-rule)# device-mac-list	${value}	Lists the devices, which use MAC address.
device(config-zone-bonjour-fencing-policy-rule)# device-type		Sets the device type.
device(config-zone-bonjour-fencing-policy-rule)# fence-range		Sets the fence range.
device(config-zone-bonjour-fencing-policy-rule)# no	device-mac-list	Disables the configuration.
device(config-zone-bonjour-fencing-policy-rule)# service-type		Sets the service type.

Commands related to device(config-zone-bonjour-policy)

Syntax and Type	Parameters (if any)	Description
device(config-zone-bonjour-policy)# description	text	Sets the description.
device(config-zone-bonjour-policy)# no	description rulerule index	Sets to delete sub commands.
device(config-zone-bonjour-policy)# rule	index: rule index	Sets the bonjour fencing rule.

Syntax and Type

Parameters (if any)

Description

device(config-zone-bonjour-policy)# description

text

Sets the description.

device(config-zone-bonjour-policy)# no

description

rulerule index

Sets to delete sub commands.

device(config-zone-bonjour-policy)# rule

index: rule index

Sets the bonjour fencing rule.

Commands related to device(config-zone-bonjour-policy-rule)

Syntax and Type	Parameters (if any)	Description
device(config-zone-bonjour-policy-rule)# bridge-service	airdisk airplay airport-management airprint airtunes apple-file-sharing apple-mobile-devices (Allows sync with iTunes over Wi-Fi) appletv icloud-sync itunes-remote itunes-sharing open-directory-master optical-disk-sharing other screen-sharing secure-file-sharing secure-shell workgroup-manager www-http www-https xgrid	Sets the bridge service.
device(config-zone-bonjour-policy-rule)# from-vlan	int	Sets the from VLAN.
device(config-zone-bonjour-policy-rule)# notes	int	Sets the notes.
device(config-zone-bonjour-policy-rule)# protocol		Sets the bridge service when it is 'other'.
device(config-zone-bonjour-policy-rule)# to-vlan	int	Sets the VLAN.

Commands related to device(config-zone-client-isolation-whitelist)

Syntax and Type	Parameters (if any)	Description
device(config-zone-client- isolation-whitelist)# auto		Enables the auto whitelist. Each entry must have an IP address in order to enable auto whitelist.
device(config-zone-client- isolation-whitelist)# description	text	Sets the description.
device(config-zone-client- isolation-whitelist)# entry	index: entry index	Sets the client isolation entry.
device(config-zone-client- isolation-whitelist)# no	auto description entry	Sets to delete sub command

Commands related to device(config-zone-client-isolation-whitelist-entry)

Syntax and Type	Parameters (if any)	Description
device(config-zone-client- isolation-whitelist-entry)# description	text	Sets the description.
device(config-zone-client- isolation-whitelist-entry)# ip	ip-address	Sets the IP address.
device(config-zone-client- isolation-whitelist-entry)# mac	mac-address	Sets the MAC IP address.
device(config-zone-client- isolation-whitelist-entry)# no	description ip	Sets to delete sub command

Commands related to device(config-zone-device-policy)

Syntax and Type	Parameters (if any)	Description
device(config-zone-device-policy)# default-action	[allow\|block]	Sets the default action to either allow or block.
device(config-zone-device-policy)# description	text	Sets the description.
device(config-zone-device-policy# no policy-rule	Device Type	Deletes the device policy rules.
device(config-zone-device-policy)# policy-rule		Sets the device policy.

Commands related to ruckus (config-zone-device-policy-policy rule)

Syntax and Type	Parameters (if any)	Description
device(config-zone-device-policy-policy-rule)# action	[allow\|block]	Sets the default action to either allow or block.
device(config-zone-device-policy-policy-rule)# description	text	Sets the description.
device(config-zone-device-policy-policy-rule)# downlink	[Rate Limiting] Rate limiting (mbps)	Sets the downlink rate limiting.
device(config-zone-device-policy-policy-rule)# no vlan		Resets the VLAN number.
device(config-zone-device-policy-policy-rule)# type	[Device Type]	Sets the device type.
device(config-zone-device-policy-policy-rule)# uplink	[Rate Limiting] Rate limiting (mbps)	Sets the uplink rate limiting.
device(config-zone-device-policy-policy-rule)# vlan	[VLAN Number]]	Sets the VLAN number.

Commands related to device(config-zone-diffserv)

Syntax and Type	Parameters (if any)	Description
device(config-zone-diffserv)# description	text	Sets the description.
device(config-zone-diffserv)# downlink-diffserv	value	Enables the tunnel diffserv downlink and sets the diffserv number.
device(config-zone-diffserv)# no	description downlink-diffserv preserved-diffserv uplink-diffserv	Disables various options.
device(config-zone-diffserv)# preserved-diffserv	value	Adds the preserved diffserv number.
device(config-zone-diffserv)# uplink-diffserv	value	Enables the tunnel diffserv uplink and sets the diffserv number.

Commands related to device(config-zone-ethernet-port-profile)

Syntax and Type	Parameters (if any)	Description
device(config-zone-ethernet-port-profile)# 8021x	text	Sets the 802.1x.
device(config-zone-ethernet-port-profile)# 8021x-enable		Enable 802.1x
device(config-zone-ethernet-port-profile)# acct-service	acct-service	Sets the accounting service.
device(config-zone-ethernet-port-profile)# auth-service	auth-service	Sets the authentication service.
device(config-zone-ethernet-port-profile)# client-visibility		Enables client visibility regardless of 802.1X authentication
device(config-zone-ethernet-port-profile)# dvlan		Enables the dynamic VLAN.
device(config-zone-ethernet-port-profile)# guest-vlan	guest-vlan-id	Enables the dynamic guest VLAN.
device(config-zone-ethernet-port-profile)# mac-bypass		Enables the MAC authentication bypass.
device(config-zone-ethernet-port-profile)# no	8021x-enable acct-service client-visibility dvlan mac-bypass proxy-acct proxy-auth tunnel	Disables various options.
device(config-zone-ethernet-port-profile)# proxy-acct		Enables proxy accounting service.
device(config-zone-ethernet-port-profile)# proxy-auth		Enables proxy authentication service.
device(config-zone-ethernet-port-profile)# supplicant	mac ${value} customusername password	Sets the supplicant.
device(config-zone-ethernet-port-profile)# tunnel		Enables tunnel.
device(config-zone-ethernet-port-profile)# type	access-port general-port trunk-port	Sets the port type. The Ethernet port type defines how the AP will manage VLAN frames. You can set Ethernet ports on an AP to one of the following types: Trunk Port, Access Port, or General Port.
device(config-zone-ethernet-port-profile)# vlan-members	vlan-members	Enter the VLAN IDs that you want to use to tag WLAN traffic that will use this profile. You can enter a single VLAN ID or a VLAN ID range (or a combination of both). The valid VLAN ID range is from 1 through 4094.
device(config-zone-ethernet-port-profile)# vlan-untag-id	vlan-untag-id	Enter the ID of the native VLAN (typically 1), which is the VLAN into which untagged ingress packets are placed upon arrival. If your network uses a different VLAN as the native VLAN, configure the VLAN Untag ID of the AP Trunk port with the native VLAN used throughout your network.

Commands related to ruckus (config-zone-guest-access)

Syntax and Type	Parameters (if any)	Description
device(config-zone-guest-access)# description	text	Sets the description.
device(config-zone-guest-access)# enable-terms-and-conditions		Enables the web portal terms and conditions.
device(config-zone-guest-access)# grace-period	minutes	Sets the grace period.
device(config-zone-guest-access)# language		Sets the language.
device(config-zone-guest-access)# logo	ftp-urlFTP URL, format: ftp://username:password@ip/file-path	Sets the logo.
device(config-zone-guest-access)# name	name	Sets the guess access service name.
device(config-zone-guest-access)# no	enable-terms-and-conditions sms-gateway terms-and-conditions	Disables the various options.
device(config-zone-guest-access)# session-timeout	minutes	Sets the session timeout as per the specified minutes.
device(config-zone-guest-access)# sms-gateway		Sets the guest pass for the SMS gateway.
device(config-zone-guest-access)# start-page	original redirectstart-url	Sets the start page.
device(config-zone-guest-access)# terms-and-conditions		Sets the terms and conditions for the web portal.
device(config-zone-guest-access)# title		Sets the title for the web portal.

Commands related to device(config-zone-hotspot)

Syntax and Type	Parameters (if any)	Description
device(config-zone-hotspot)# description	text	Sets the description.
device(config-zone-hotspot)# grace-period	minutes	Sets the grace period.
device(config-zone-hotspot)# https-redirect	enable	If enabled, the AP tries to redirect the HTTPS requests to the hotspot portal.
device(config-zone-hotspot)# language		Sets the portal language.
device(config-zone-hotspot)# location-id	location-id	Sets the location ID.
device(config-zone-hotspot)# location-name	name	Sets the location name.
device(config-zone-hotspot)# logo	ftp-url	Sets the logo.
device(config-zone-hotspot)# logon-url	internal externallogon-url	Sets the logon model
device(config-zone-hotspot)# mac-address-format		Sets the MAC address format.

device(config-zone-hotspot)# no	https-redirect show-terms-conditions walled-gardenwalled-garden-list: Allows unauthorized destinations. Comma-separated IP, IP range, CIDR and regular expression domain name list.	Disables the commands.
device(config-zone-hotspot)# session-timeout	minutes	Sets the sessions timeout.
device(config-zone-hotspot)# show-terms-conditions		Shows the terms and conditions.
device(config-zone-hotspot)# smart-client-support	none enable onlyinstructions	Sets the smart client support.
device(config-zone-hotspot)# start-page	original start-url	Sets the start page.
device(config-zone-hotspot)# terms-conditions	redirect	Sets the terms and conditions.
device(config-zone-hotspot)# title	title	Sets the title.
device(config-zone-hotspot)# walled-garden	walled-garden-list	Enables Walled Garden. Allows unauthorized destinations. Comma-separated IP, IP range, CIDR and regular expression domain name list

Commands related to device(config-zone-hotspot20-venue-profile)

Syntax and Type	Parameters (if any)	Description
device(config-zone-hotspot20-venue-profile)# description	text	Sets the description.
device(config-zone-hotspot20-venue-profile)# no	venue-names wan-at-capacity wan-sym-link	Disables the commands.
device(config-zone-hotspot20-venue-profile)# venue-category	unspecifiedunspecified assembly [ coffee-shop\|passenger-terminal\|restaurant\|bar\|arena\|library\|place-of-worship\|emergencycoordination-center\|museum\|stadium\|convention-center\|unspecified\|amphitheater\|amusement-park\|theater\|zoo-or-aquarium] business[unspecified\| on \|attorney-office\|professional-office\|research-and-development-facility\|doctor-or-dentist-office\|fire-station\|post-office\|bank] educational[unspecified\|school-primary\|university-or-college\|school-secondary]	Sets the venue category
device(config-zone-hotspot20-venue-profile) venue-category	factory-and-industrial[\|factory] institutional[hospital\|group-home\|unspecified\|prison-or-jail\|long-term-care-facility\|alcohol-and-drugrehabilitation-center] mercantile[grocery-market\|automotive-service-station\|unspecified\|retail-store\|gas-station\|shopping-mall] residential[unspecified\|private-residence\|hotel-or-motel\|dormitory\|boarding-house] storageunspecified utility-and-miscellaneousunspecified vehicular [ train\|airplane\|ferry\|a bus\|motor-bike\|unspecified\|ship-or-boat outdoor[unspecified\|city-park\|bus-stop\|traffic-control\|rest-area\|muni-mesh-network\|kiosk]	Sets the venue category.
device(config-zone-hotspot20-venue-profile)# venue-names	languagenames	Sets the venue-names.
device(config-zone-hotspot20-venue-profile)# wan-at-capacity		Sets the WAN capacity.
device(config-zone-hotspot20-venue-profile)# wan-downlink-load	downlink-load: Load between 1 and 255	Sets the WAN downlink load.
device(config-zone-hotspot20-venue-profile)# wan-downlink-speed	speed	Sets the WAN downlink speed in (kbps).
device(config-zone-hotspot20-venue-profile)# wan-link-status	[link-up\|link-test\|link-down]	Sets the link status.
device(config-zone-hotspot20-venue-profile)# wan-load-duration	duration	Sets the load measurement duration.
device(config-zone-hotspot20-venue-profile)# wan-sym-link		Enables symmetric link.
device(config-zone-hotspot20-venue-profile)# wan-uplink-load	uplink-load	Sets the WAN uplink load.
device(config-zone-hotspot20-venue-profile)# wan-uplink-speed	speed: Uplink speed in kbps	Sets the WAN uplink speed.

Commands related to device(config-zone-hotspot20-wlan-profile)

Syntax and Type	Parameters (if any)	Description
device(config-zone-hotspot20-wlan-profile)# access-network-type		Sets the access network type.
device(config-zone-hotspot20-wlan-profile)# asra		Sets the ASRA profile.
device(config-zone-hotspot20-wlan-profile)# asra-dns-redirect	url	Sets the ASRA DNS redirection.
device(config-zone-hotspot20-wlan-profile)# asra-http-redirect		Sets the ASRA HTTP redirection.
device(config-zone-hotspot20-wlan-profile)# asra-online-signup	ssid	Sets the ASRA online signup.
device(config-hotspot20-wlan-profile)# asra-terms-conditions	url	Sets the ASRA terms and conditions.
device(config-zone-hotspot20-wlan-profile)# connect-capabilities	[pptp\|http\|voip-6\|ipsec-vpn\|ikev2\|ftp\|tls\|voip-17\|icmp\|ssh\|esp][open\|unknown\|closed]	Sets the connection capabilities. pptp: Protocol Number:6 Port:1723 Protocol Name: Used by PPTP VPNs http: Protocol Number:6 Port:80 Protocol Name: HTTP voip-6: Protocol Number:6 Port:5060 Protocol Name: VoIP ipsec-vpn: Protocol Number:17 Port:4500 Protocol Name: IPSec VPN ikev2: Protocol Number:17 Port:500 Protocol Name: Used by IKEv2(IPSec VPN) tls: Protocol Number:6 Port:443 Protocol Name: Used by TLS VPN voip-17: Protocol Number:17 Port:5060 Protocol Name: VoIP icmp: Protocol Number:1 Port:0 Protocol Name: ICMP
device(config-zone-hotspot20-wlan-profile)# connect-capabilities	[pptp\|http\|voip-6\|ipsec-vpn\|ikev2\|ftp\|tls\|voip-17\|icmp\|ssh\|esp][open\|unknown\|closed]	ssh: Protocol Number:6 Port:22 Protocol Name: SSH esp: Protocol Number:50 Port:0 Protocol Name: ESP open: Open unknown: Unknown closed: Closed
device(config-zone-hotspot20-wlan-profile)# cust-connect-capabilities	protocol-nameprotocol-number	Creates or updates the custom connection capabilities.
device(config-zone-hotspot20-wlan-profile)# description	text	Sets the description.
device(config-domain-zone-hotspot20-wlan-profile)# identity-providers	identityProviderdefault	Sets the identity providers.
device(config-domain-zone-hotspot20-wlan-profile)# internet-option	enable	Enables the specified WLAN with Internet connectivity.
device(config-domain-zone-hotspot20-wlan-profile)# ipv4-address	[port-restrict-address\|single-nated-private-address\|double-nated-private-address\|port-restricted-addressdouble- nated-address\|unknown\|public-address\|port-restricted-address-single-nated-address\|not-available ]	Sets the IPv4 address.
device(config-domain-zone-hotspot20-wlan-profile)# ipv6-address	[ not-available \| unknown \| available ]	Sets the IPv6 address.
device(config-domain-zone-hotspot20-wlan-profile)# name	name	Sets the hotspot 2.0 WLAN profile name.
device(config-domain-zone-hotspot20-wlan-profile)# no	asra asra-dns-redirect asra-http-redirect asra-online-signup asra-terms-conditions cust-connect-capabilities identity-providers internet-option	Disables the commands.
device(config-domain-zone-hotspot20-wlan-profile)# operator	name	Sets the operator name.

Commands related to device(config-zone-hotspot20-wlan-profile-cust-connect-capabilities)

Syntax and Type	Parameters (if any)	Description
device(config-zone-hotspot20-wlan-profile-cust-connect-capabilities)# port	port	Set the port number.
device(config-zone-hotspot20-wlan-profile-cust-connect-capabilities)# protocol	protocol	Sets the protocol number.
device(config-zone-hotspot20-wlan-profile-cust-connect-capabilities) status	[closed\|unknown\|open]	Sets the status.

Commands related to device(config-zone-l2-acl)

Syntax and Type	Parameters (if any)	Description
device(config-zone-l2-acl)# action	[allow\|block]	Sets the handling action to allow or block.
device(config-zone-l2-acl)# description	text	Sets the description.
device(config-zone-l2-acl)# mac	${value}	Sets the MAC value.
device(config-zone-l2-acl)# no mac	${value}	Disables the MAC value.

Commands related to ruckus (config-zone-web-authentication)

Syntax and Type	Parameters (if any)	Description
device(config-zone-web-authentication)# description	text	Sets the description.
device(config-zone-web-authentication)# grace-period	minutes	Sets the grace period.
device(config-zone-web-authentication)# language		Sets the language.
device(config-zone-web-authentication)# session-timeout	minutes	Sets the session timeout as per the specified minutes.
device(config-zone-web-authentication)# start-page	original redirectstart-url	Sets the start page.

Commands related to device(config-zone-wechat)

Syntax and Type	Parameters (if any)	Description
device(config-zone-wechat)# authentication-url	text	Sets the authentication URL.
device(config-zone-wechat)# black-list	text	Sets the black list.
device(config-zone-wechat)# description	text	Sets the description.
device(config-zone-wechat)# dnat-destination	text
device(config-zone-wechat)# dnat-port-mapping	sourcedest	Sets the DNAT destination.
device(config-zone-wechat)# grace-period	minutes	Set the grace period as minutes.
device(config-zone-wechat)# no	dnat-port-mapping white-list	Disables various options.
device(config-zone-wechat)# white-list	white-list: Allow unauthorized destinations. Comma- separated IP, IP range, CIDR and regular expression domain name list.	Sets the white list.

Commands related to device(config-zone-wlan)

Syntax and Type	Parameters (if any)	Description
device(config-zone-wlan)# aaa-vlan-override		Enables AAA VLAN override.
device(config-zone-wlan)# access-network		Enables tunnel WLAN traffic to the controller.
device(config-zone-wlan)# acct-delay-time		Enables the acct-delay time.
device(config-zone-wlan)# acct-interval	minutes	Set the authentication service. Enables accounting interval to send interim updates.
device(config-zone-wlan)# acct-service	name	Sets the accounting service.
device(config-zone-wlan)# acct-service-use-proxy		Set the accounting service: Uses the controller as proxy.
device(config-zone-wlan)# acct-ttg-session		Sets the accounting service. Enables accounting for TTG sessions.
device(config-zone-wlan)# app-visibility		Sets the application to visible mode.
device(config-zone-wlan)# assoc-rssi-threshold	numbers	Sets the associated RSSI threshold ranging from -60 to -90.
device(config-zone-wlan)# auth-method		Sets the authentication method.
device(config-zone-wlan)# auth-rssi-threshold	numbers	Sets the authentication RSSI threshold ranging from -60 to -90.
device(config-zone-wlan)# auth-service	name	Sets the authentication service.
7.0 Beta feature device(config-zone-wlan)# auth-service aaa-auth		Sets the authentication service and enables non-proxy AAA service.
7.0 Beta feature device(config-zone-wlan)# auth-service sz-auth-service		Sets the authentication service and enables SmartZone proxy.
device(config-zone-wlan)# auth-service-use-proxy		Sets the authentication service. Enables accounting for TTG sessions.
device(config-zone-wlan)# auth-type		Sets the authentication type.
device(config-zone-wlan) #bss-minrate	[ 5.5mbps \| 24mbps \| 12mbps \| 1mbps \| 2mbps ]	Sets the BSS minimum rate.
device(config-zone-wlan) #bypass-cna		Enables to bypass CNA server.
device(config-zone-wlan)# calea		Enables Calea server.
device(config-zone-wlan)# called-sta	[ bssid \| apmac \| none \| apgroup]	Sets the called STA ID.
device(config-zone-wlan)# client-fingerprinting		Sets the client fingerprinting.
device(config-zone-wlan)# client-tx-rx-statistics		Enables ignore statistics from unauthorized clients.
device(config-zone-wlan)# description	text	Sets the description,
device(config-zone-wlan)# device-policy	policy name	Sets the device policy.
device(config-zone-wlan)# dgaf		Disables downstream group-address frame forwarding.
device(config-zone-wlan)# dhcp-option-82		Enables an AP to encapsulate additional information (such as VLAN ID, AP name, SSID, and MAC address) into DHCP request packets before forwarding them to the DHCP server.
device(config-zone-wlan)# dhcp-option-82-format	[soft-gre \| ruckus-gre \| subopt-1 ]	Enables an AP to encapsulate additional information into DHCP request packets before forwarding them to the DHCP server.
device(config-zone-wlan)# dhcp-option-82-subopt	[1 \| 2\| 150 \| 151 \| mac-format]	Enables DHCP option 82 format options. Subopt-1 with format and select the option. The options are : AP-MAC AP-MAC ESSID AP-NAME ESSID Subopt-2 with format and select the option. The options are : Client-MAC AP-MAC AP-MAC ESSID AP-NAME Subopt -150 with VLAN-ID. Subopt -151 with AREA-NAME. Subopt -Mac format delimiter .
device(config-zone-wlan)# diffserv-profile	name	Sets the Diffserv profile.
device(config-zone-wlan)# directed-multicast		Sets the per-radio-client count at which an AP stops converting group addressed data traffic to unicast.
device(config-zone-wlan)# directed-threshold	number Directed threshold should range from 0 to 128	Sets the directed MC/BC threshold
device(config-zone-wlan)# disable-band-balancing		Disables radio band balancing on WLAN.
device(config-zone-wlan)# disable-load-balancing		Disables client load balancing on WLAN.
device(config-zone-wlan)# disable-wlan		Disables this WLAN service.
device(config-zone-wlan)# dnlink-limit		Sets the downlink rate limiting.
device(config-zone-wlan)# dns-server-profile		Sets the DNS server profile.
device(config-zone-wlan)# dp-tunnel-nat		Enables the DP tunnel NAT server.
device(config-zone-wlan)# dpsk-effective-type		Sets the DPSK expiration effective type.
device(config-zone-wlan)# dpsk-expiration		Sets DPSK expiration.
device(config-zone-wlan)# dpsk-length	number: key length (8-62)	Sets the DPSK length. The range is 8-62.
device(config-zone-wlan)# dpsk-type		Sets the DPSK type.
7.0 Beta feature device(config-zone-wlan)# dpsk-server-type	external	Enables external DPSK
device(config-zone-wlan)# drop-random-probes		Sets the option, drop random probes.
device(config-zone-wlan)# dtim-interval	number: DTIM interval must range from 1 to 255	Sets the frequency at which the Delivery Traffic Indication Message (DTIM) will be included in Beacon frames.
device(config-zone-wlan)# eap-acct-ip-attr-ignore		Accounting service - enables the attribute ignore for EAP Accounting IP address.
device(config-zone-wlan)# enable-rfc5580-support		Enables this attribute to deliver the location information only for those APs where location attribute is configured.
(config-zone-wlan)# enable-type		Enables the WLAN service type.
device(config-zone-wlan)# enc-algorithm		Sets the encryption algorithm.
device(config-zone-wlan)# enc-method		Sets the encryption method.
device(config-zone-wlan)# enc-mfp		Sets the MFP.
device(config-zone-wlan)# enc-passphrase	password	Sets the encryption passphrase.
device(config-zone-wlan)# enc-wep-key	wep-key-index wep-key WEP key (HEX), length should be 10 (WEP-64) or 26 (WEP-128)	Sets WEP key (HEX).
device(config-zone-wlan)# external-nas		Enables the external NAS IP address.
device(config-zone-wlan)# flow-log		Enables the flow log.
device(config-zone-wlan)# force-dhcp	timeout seconds timeout: Sets the disconnect client timeout interval seconds: Sets the disconnect client timeout in intervals of 5 - 15 seconds	Sets the timeout for DHCP in seconds.
device(config-zone-wlan)# forwarding-policy		Sets the forwarding policy configurations.
device(config-zone-wlan)# guest-access	name	Sets the guest access service.
device(config-zone-wlan)# guest-access-acct-service		Sets the accounting server.
device(config-zone-wlan)# guest-access-auth-service		Sets the authentication server.
device(config-zone-wlan)# hessid	hessid	Sets the WLAN HESSID value.
device(config-zone-wlan)# hide-ssid		Hides SSID in beacon broadcast.
device(config-zone-wlan)# hotspot	name	Sets the hotspot service.
device(config-zone-wlan)# hotspot2	name	Sets the hotspot 2.0 configuration.
device(config-zone-wlan)# hotspot20-osu-support		Enables the hotspot 2.0 device registration from the guest portal.
device(config-zone-wlan)# inactivity-timeout	number	Sets the inactivity timeout. Terminates idle user sessions after the specified seconds of inactivity.
device(config-zone-wlan)#ipsec-profile	$ { value }	Sets an IPSec profile (Soft GRE only).
device(config-zone-wlan)#join-accept-timeout	<number>: Sets the join expire time ranging from 1 to 300.	Sets the join expire time.
device(config-zone-wlan)#join-ignore-threshold	<number>: Sets the wait threshold ranging from 1 to 50.	Sets the wait threshold time.
device(config-zone-wlan)#join-ignore-timeout	<number>: Sets the wait time ranging from 1 to 60.	Sets the wait time.
device(config-zone-wlan)# l2-acl	[ ACL Name ]	Sets the layer 2 access control list.
device(config-zone-wlan)# mac-address-format		Sets the MAC address format.
device(config-zone-wlan)# mac-auth	password	Sets the MAC authentication.
device(config-zone-wlan)# max-clients	number	Sets the maximum clients. Allows clients per AP radio to associate with this WLAN. Range is between 1 and 512.
device(config-zone-wlan)# mgmt-tx-rate	[ 11mbps \| 1mbps \| 54mbps \| 24mbps \| 36mbps \| 12mbps \| 5.5mbps \| 9mbps \| 48mbps \| 2mbps \| 18mbps \| 6mbps ]	Sets the management Tx rates.
device(config-zone-wlan)# mobility-domain-id	number: ID number (1-65535)	Sets the mobility domain identifier (for 802.11r).
device(config-zone-wlan)# no	aaa-vlan-override access-network acct-delay-time acct-service acct-service-use-proxy acct-ttg-session auth-service-use-proxy app-visibility assoc-rssi-threshold auth-rssi-threshold auth-service-use-proxy bss-minrate bypass-cna calea client-fingerprinting client-tx-rx-statistics device-policy dgaf dhcp-option-82 dhcp-option-82-subopt diffserv-profile diffserv-profile directed-multicast disable-band-balancing disable-load-balancing disable-wlan dnlink-limit dns-server-profile dp-tunnel-nat drop-random-probes	Disables or deletes the configuration settings.
device(config-zone-wlan)# no	eap-acct-ip-attr-ignore enable-rfc5580-support external-nas flow-log force-dhcp hessid hide-ssid hotspot20-osu-support ipsec-profile l2-acl mac-auth ofdm-only (Orthogonal Frequency Division Multiplexing) okc-support onboarding-auth-service onboarding-auth-service-use-proxy pmk-caching-support probe-rssi-threshold proxy-arp qos-map-enable roam single-session-id-acct split-tunnel-profile ssid-rate-limiting support-802-11d support-802-11k support-802-11r transient-client-mgmt uplink-limit user-traffic-profile venue-code vlan-enabled vlan-pooling wireless-client-isolation wireless-client-isolation-whitelist zero-it-activation zero-it-onboarding	Disables or deletes the configuration settings.
device(config-domain-zone-wlan)# ofdm-only		Enables OFDM (Orthogonal Frequency Division Multiplexing) rates.
device(config-zone-wlan)# okc-support		Enables OKC support.
device(config-zone-wlan)# onboarding-auth-service	service-name local realm service-name remote realm service-name local realm never service-name local realm hour expiration-value: Expiration value between 1 and 175200. service-name local realm day expiration-value: Expiration value between 1 and 7300. service-name local realm week expiration-value: Expiration value between 1 and 1040. service-name local realm month expiration-value - Expiration value between 1 and 240.	Sets the onboarding authentication service.
device(config-zone-wlan)# onboarding-auth-service-use-proxy		Sets the onboarding authentication service using the controller proxy server.
device(config-zone-wlan)# onboarding-portal	name	Sets the onboarding portal.
device(config-zone-wlan)# operator-realm		Sets the operator realm.
device(config-zone-wlan)# pmk-caching-support		Enables the PMK caching support.
device(config-zone-wlan)# priority		Sets the priority as either low or high.
device(config-zone-wlan)#probe-rssi-threshold		Probes the RSSI threshold.
device(config-zone-wlan)# proxy-arp		Enables proxy ARP.
device(config-zone-wlan)# qos-map	priority	Updates the QoS map.
device(config-zone-wlan)# qos-map-enable		Enables the QoS map.
device(config-zone-wlan)# radius-nas-id	number	Sets the RADIUS NAS ID.
device(config-zone-wlan)# radius-nas-ip	ip	Sets the RADIUS NAS IP address.
device(config-zone-wlan)# radius-nas-ip-type	[sz-mgmt-ip\|disabled\|user\|sz-control-ip]	Sets the RADIUS NAS IP type.
device(config-zone-wlan)# radius-nas-max-retries	times	Sets the maximum number of retries for RADIUS NAS.
device(config-zone-wlan)# radius-nas-reconnect-primary	minutes	Sets the reconnection to the primary RADIUS NAS.
device(config-zone-wlan)# radius-nas-request-timeout	seconds	Sets the RADIUS NAS request timeout.
device(config-zone-wlan)# radius-nas-type		Sets the RADIUS NAS type.
device(config-zone-wlan)# roam		Enables roaming.
device(config-zone-wlan)# roam-factor	2.4g value 5g value	Sets the roam factor.
device(config-zone-wlan)# scheduler	[ Profile Name ]	Sets the WLAN scheduler profile.
device(config-zone-wlan)# single-session-id-acct		Enables Single Session ID Accounting.
device(config-zone-wlan)# split-tunnel-profile	${value}	Sets a split tunnel profile.
device(config-zone-wlan)# ssid	ssid	Sets the WLAN SSID configuration.
device(config-zone-wlan)# ssid-rate-limiting	uplinkdownlink	Sets the SSID rate limit as either uplink or downlink with the range 1-200 mbps.
7.0 Beta feature device(config-zone-wlan)# ssid wlan-cli-sz-proxy		Sets the WLAN SSID SmartZone proxy configuration from CLI.
device(config-zone-wlan)# support-802-11d		Enables support for 802.11d.
device(config-zone-wlan)# support-802-11k		Enables support for 802.11k neighbor reports.
device(config-zone-wlan)# support-802-11r		Enables 802.11r fast BSS transition.
device(config-zone-wlan)# transient-client-mgmt		Sets the transient client management.
device(config-zone-wlan)# tunnel-profile	${value}	Sets the GRE tunnel profile.
device(config-zone-wlan)# uplink-limit		Sets the uplink rate limiting.
device(config-zone-wlan)# user-traffic-profile		Sets the user traffic profile.
device(config-zone-wlan)# venue-code		Enables venue code.
device(config-zone-wlan)# vlan-enabled		Enables dynamic VLAN.
device(config-zone-wlan)# vlan-id	vlan-id	Sets the VLAN ID.
device(config-zone-wlan)# vlan-pooling	name	Enables and sets the VLAN pooling profile.
device(config-zone-wlan)# web-authentication	name	Sets the web authentication service.
device(config-zone-wlan)# wechat	name	Sets the WeChat services.
device(config-zone-wlan)# wireless-client-isolation		Sets the wireless client Isolation.
device(config-zone-wlan)# wireless-client-isolation-whitelist	whitelist name	Sets the wireless client Isolation whitelist. The whitelist can only contain wired destinations. Wireless clients are not supported on the whitelist.
device(config-zone-wlan)# zero-it-activation		Enables zero-it activation (WLAN users are provided with wireless configuration installer after they log in).
device(config-zone-wlan)# zero-it-onboarding		Enables zero-it device registration from the guest portal.

Commands related to device(config-zone-wlan-group).

Syntax and Type	Parameters (if any)	Description
device(config-zone-wlan-group)# description	text	Sets the description,
device(config-zone-wlan-group)# no	wlanname	Disables or removes WLAN from this group.
device(config-zone-wlan-group)# wlan	namevlanvlanTagnasidnasid namenasidnasidvlanvlanTag namevlanvlanTag namenasidnasid namevlan-poolingvlanPooling namevlan-poolingvlanPoolingnasid name	Sets a WLAN in this group or overrides VLAN setting.

Syntax and Type

Parameters (if any)

Description

device(config-zone-wlan-group)# description

text

Sets the description,

device(config-zone-wlan-group)# no

wlanname

Disables or removes WLAN from this group.

device(config-zone-wlan-group)# wlan

namevlanvlanTagnasidnasid

namenasidnasidvlanvlanTag

namevlanvlanTag

namenasidnasid

namevlan-poolingvlanPooling

namevlan-poolingvlanPoolingnasid

name

Sets a WLAN in this group or overrides VLAN setting.

Commands related to device(config-zone-wlan-qos-map)

Syntax and Type	Parameters (if any)	Description
device(config-zone-wlan-qos-map)# dscp-range	dscp-low-value dscp-high-value	Sets the range as either high or low values for DSCP.
device(config-zone-wlan-qos-map)# enable		Enables the QoS map setting.
ruckus(config-zone-wlan-qos-map)# excp-dscp-values Type: Privileged		Sets the exception values for DSCP.
device(config-zone-wlan-qos-map)# no	enable excp-dscp-values	Disables the commands.

Commands related to ruckus (config-zone-wlan-scheduler)

Syntax and Type	Parameters (if any)	Description
device(config-zone-wlan-scheduler)# description	text	Sets the description,
device(config-zone-wlan-scheduler)# no	description schedule-data [weekday \|empty ] [start time value \|empty] [end time value ] \|${weekday}	Disables the commands.
device(config-zone-wlan-scheduler)# schedule-data	[weekday \|empty][start time value \|empty][end time value] ${weekday}	Sets the schedule table.

Syntax and Type

Parameters (if any)

Description

device(config-zone-wlan-scheduler)# description

text

Sets the description,

device(config-zone-wlan-scheduler)# no

description

schedule-data [weekday |empty ] [start time value |empty] [end time value ] |${weekday}

Disables the commands.

device(config-zone-wlan-scheduler)# schedule-data

[weekday |empty][start time value |empty][end time value]

${weekday}

Sets the schedule table.

RUCKUS SmartZone (ST-GA) Command Reference Guide, 7.0.0 800-73385-001 Rev B

`zone`

Commands related to device(config-zone)

Commands related to device(config-zone-aaa)

Commands related to device(config-zone-ap-group)

Commands related to device(config-zone-ap-snmp-options configuration)

Commands related to device(config-zone-ap-snmp-options-snmp-v2-community configuration)

Commands related to device(config-zone-ap-snmp-options-snmp-v3-user configuration)

Commands related to device(config-zone-ap-group lldp)

Commands related to device(config-zone-ap-group-port-setting)

Commands related to device(config-zone-ap-model)

Commands related to device(config-zone-ap-model-lan1)

Commands related to device(config-zone-ap-registration-rule)

Commands related to device(config-zone-block-client)

Commands related to device(config-zone-bonjour-fencing-policy)

Commands related to device(config-zone-bonjour-fencing-policy-rule)

Commands related to device(config-zone-bonjour-policy)

Commands related to device(config-zone-bonjour-policy-rule)

Commands related to device(config-zone-client-isolation-whitelist)

Commands related to device(config-zone-client-isolation-whitelist-entry)

Commands related to device(config-zone-device-policy)

Commands related to ruckus (config-zone-device-policy-policy rule)

Commands related to device(config-zone-diffserv)

Commands related to device(config-zone-ethernet-port-profile)

Commands related to ruckus (config-zone-guest-access)

Commands related to device(config-zone-hotspot)

Commands related to device(config-zone-hotspot20-venue-profile)

Commands related to device(config-zone-hotspot20-wlan-profile)

Commands related to device(config-zone-hotspot20-wlan-profile-cust-connect-capabilities)

Commands related to device(config-zone-l2-acl)

Commands related to ruckus (config-zone-web-authentication)

Commands related to device(config-zone-wechat)

Commands related to device(config-zone-wlan)

Commands related to device(config-zone-wlan-group).

Commands related to device(config-zone-wlan-qos-map)

Commands related to ruckus (config-zone-wlan-scheduler)