rbddump
Displays the board data of the
controller.
Command Default
Controller board data is not displayed.
Modes
Privileged EXEC mode
Usage Guidelines
This command is supported on all SmartZone platforms except SmartZone Data Plane controller.
Examples
The following example displays the board data for the controller.
device# rbddump name: Gallus magic: 35333131 cksum: 6dd rev: 5.4 Serial#: 00000089 Customer ID: ruckus Model: SCG1k V54 Board Type: Undef V54 Board Class: AP71 Random#: 0000 0000 0000 0000 0000 0000 0000 0000 symimgs: no ethport: 0 V54 MAC Address Pool: yes, size 32, base 00:1D:2E:89:00:00 major: 0 minor: 0 pciId: 0000 dblade0: yes 00:1D:2E:89:00:10 dblade1: yes 00:1D:2E:89:00:18 eth0: yes 00:1D:2E:89:00:00 eth1: yes 00:1D:2E:89:00:01 eth2: - 00:1D:2E:89:00:02 eth3: - 00:1D:2E:89:00:03 eth4: - 00:1D:2E:89:00:04 eth5: - 00:1D:2E:89:00:05 uart0: no sysled: no, gpio 0 sysled2: no, gpio 0 sysled3: no, gpio 0 sysled4: no, gpio 0 Fixed Ctry Code: no Antenna Info: no, value 0x00000000 Local Bus: disabled factory: yes, gpio 8 serclk: internal cpufreq: calculated 0 Hz sysfreq: calculated 0 Hz memcap: disabled watchdg: enabled