dhcp-relay

Enables Dynamic Host Configuration (DHCP) relay.
Syntax
dhcp-relay
no dhcp-relay

After the dhcp-relay command is entered, the following configuration syntax is available:

{ dhcp-option82 | dhcp-server1 server-name | dhcp-server2 server-name }

After the dhcp-option82 command is entered, the following configuration syntax is available:

{ subopt1 } { ap-essid | ap-info-default | ap-info-location | ap-mac | format }
subopt150
subopt151 { essid area-name area-name}
subopt2 { ap-essid | ue-essid | ue-mac | ap-mac }
Command Default

DHCP relay is not enabled.

Parameters
dhcp-option82
Enables DHCP Option82.
subopt1
Enables Subopt-1.
ap-essid
Uses the Access Point (AP) MAC hex ESSID.
ap-info-default
Uses the default AP information in the following format: IF-Name:VLAN-ID:ESSID:AP-Model:AP-Name:AP-MAC.
ap-info-location
Uses the AP location information in the following format: IF-Name:VLAN-ID:ESSID:AP-Model:AP-Name:AP-MAC:Location.
ap-mac
Uses the AP MACin the following format: AP-MAC-hex.
format
Uses the specified format.
subopt150
Enables Subopt-1.
subopt151
Enables Subopt-1.
subopt2
Enables Subopt-1.
dhcp-server1
Sets DHCP server 1
dhcp-server2
Sets DHCP server 1
Modes

TTG PDG Profile configuration mode

Domain configuration mode

Zone configuration mode

Usage Guidelines

This command is used in several different configuration modes.

This command is supported on all the controllers in zone and domain configuration mode. In TTG PDG Profile configuration mode, only the SmartZone 300 supports this command.

Examples

The following example creates a TTG PDG profile named newprofile123 and configures DHCP relay with DHCP Option82 parameters.

device# config
device(config)# ttg-pdg-profile newprofile123
device(config-ttg-pdg-profile)# dhcp-relay
device(config-ttg-pdg-profile)# dhcp-option82
device(config-ttg-pdg-profile-dhcp-option82)# subopt1 ap-essid

The following example disables DHCP Relay when in the Zone configuration mode.

device(config-zone)# no dhcp-relay
Do you want to continue to disable (or input 'no' to cancel)? [yes/no] yes
Successful operation