ap-internal-subnet

Configures internal subnet for a tunnel.
Syntax
ap-internal-subnet ip-address
Command Default

An internal subnet is not configured for a tunnel.

Parameters
ip address
Specifies the IP address in 10.x.0.0 format.
Modes

Global configuration mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example configures an internal subnet for a tunnel with the IP address 10.1.0.0. 

device# config
device(config)# ap-internal-subnet 10.1.0.0
Parent topic: Commands A through C