data-plane

Retrieves data plane information and enters debug data-plane configuration mode.
Syntax
data-plane name

After the data-plane name command is entered to enable debug data-plane configuration mode, the following configuration syntax is available:

[ show summary |show detail |dp arp | dp arp summary | dp flow fid id | dp flow filter | dp flow summary | dp fpa | dp gretun tid id | dp gretun summary | dp host all | dp host summary | dp macs | dp macs summary | dp misc| dp route show | dp route summary | dp route summary | dp sysctl | ping | route | uptime ]
Command Default

Data plane information is not retrieved

Parameters
show summary
Displays dataplane summarized information.
show detail
Displays detailed dataplane information.
dp arp
Displays datacore ARP table information.
dp arp summary
Displays datacore ARP table summarized infomration.
dp flow fid id
Displays datacore flow entry.
dp flow filter
Adds datacore flow filter.
dp flow summary
Displays datacore flow table summary.
dp fpa
Displays the datacore FPA table.
dp gretun tid id
Displays datacore GRE tunnel entries.
dp gretun summary
Displays summarized datacore GRE tunnel table information.
dp host all
Displays datacore host table information.
dp host summary
Displays summarized datacore host table summary information.
dp macs
Dissplays the datacore MAC table.
dp macs summary
Dissplays summarized datacore MAC table infomration.
dp misc
Datacore misc commands.
dp route show
Displays datacore routing entries.
dp route summary
Displays summarized datacore routing table infomration.
dp sysctl
Datacore control commands.
route
Displays linux routing table information.
Uptime
Displays the time the system has been up.
Modes

Debug configuration mode

Usage Guidelines

This command is supported on the SmartZone 100 and SmartZone 300.

Examples

The following example enters debug data-plane configuration mode.

device(debug)# data-plane dp
device(debug-data-plane)#
Parent topic: Commands D through F