rks-gre

Creates or updates the RUCKUS GRE configuration.
Syntax
rks-gre tunnel-name
no rks-gre [ tunnel-name ]

After the rks-gre command is entered to enter RKS GRE configuration mode, the following configuration syntax is available:

{ gateway-mtu { auto | manual-mtu-size } | tunnel-encryption { AES128 | AES256 | DISABLE } | tunnel-mode { gre | gre-udp } }
Command Default

RUCKUS GRE is not configured.

Parameters
tunnel-name
RUCKUS GRE tunnel name.
gateway-mtu
Sets the WAN interface MTU.
auto
Enables auto discover for the MTU size.
manual-mtu-size
Manually sets the MTU size. Range is from 850 to 1500.
tunnel-encryption
Enables the tunnel encryption.
AES128
Uses the AES128 encryption algorithm.
AES256
Uses the AES256 encryption algorithm.
DISABLE
Disables the tunnel encryption.
tunnel-mode
Sets the tunnel mode.
gre
GRE tunnel mode.
gre-udp
GRE and UDP tunnel mode that supports APs behind Network Address Translation (NAT) tunnels.
Modes

Global configuration mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

The no form of this command deletes the RUCKUS GRE configuration.

Examples

The following example shows how to configure RUCKUS GRE tunnel options. 

device# config
device(config)# rks-gre GRE1
device(config-rks-gre)# gateway-mtu 950
device(config-rks-gre)# tunnel-encryption AES256
device(config-rks-gre)# tunnel-mode gre
Parent topic: Commands O through Sh