eap-sim

Enables EAP SIM and enters EAP SIM configuration mode to update EAP SIM configurations.
Syntax
eap-sim [ enable ]

After the eap-sim command is entered to enable EAP SIM configuration mode, the following configuration syntax is available:

[ cache-cleanup | fast-reauth |no { cache-cleanup | fast-reauth | secret key | user-id-privacy } | secret key | user-id-privacy ]
Command Default

EAP SIM configuration mode is not enabled.

Parameters
enables
Enables EAP SIM.
cache-cleanup
Enables the cache cleanup setting.
fast-reauth
Enables fast re-authentication support.
no
Disables configurations.
secretkey
Sets the EAP-AKA active secret key number.
user-id-privacykey
Enables user identity privacy support.
Modes

Global configuration mode

Usage Guidelines

This command is supported on the SmartZone 300 and vSZ-H controllers only.

Examples

The following example enables EAP SIM.

device# config
device(config)# eap-sim enable

The following example enters EAP SIM configuration mode.

device# config
device(config)# eap-sim
device(config-eap-sim)#

The following example enables the cache cleanup setting.

device# config
device(config)# eap-sim
device(config-eap-sim)# cache-cleanup
Parent topic: Commands D through F