`wlan-scheduler`

To create or update the WLAN scheduler configurations, use the following command.

Syntax

wlan-schedulername

no wlan-scheduler

After the wlan-scheduler command is entered to enter WLAN scheduler configuration mode, the following configuration syntax is available:

{nameprofile-name|schedule-data[weekday][start-time][end-time]}

Command Default

No WLAN scheduler configurations are created.

Parameters

name

WLAN scheduler name.

nameprofile-name

Sets the WLAN scheduler profile name.

schedule-data

Sets the schedule table.

weekday: Sets the WLAN schedule to a specified weekday. If no weekday is entered, the default value is all days.
start-time: Sets the WLAN schedule to start from a time value set in 15-minute intervals from 00:00 to 23:45. If no start time is entered, the default value is the whole day.
end-time: Sets the WLAN schedule to end at a time value set in 15-minute intervals from 00:15 to 24:00.

Modes

Global configuration mode

Usage Guidelines

This command is supported for SmartZone 100 devices.

The no form deletes all WLAN scheduler configurations.

Examples

The following example creates a WLAN scheduler named schedule1 to run on Tuesdays from 7am to 6pm.

device# config
device(config)# wlan-scheduler schedule1
device((config-wlan-scheduler)# schedule-data tuesday 07:00 18:00

The following example deletes all WLAN scheduler configurations.

device(config)# no wlan-scheduler

wlan-scheduler