patches

Uploads, applies and displays patch scripts.
Syntax
patches
no patches

After the patches command is entered, the following configuration syntax is available in patches configuration mode:

{ apply script-name [ script-options ] | show { applied-patches | uploaded-patches } | upload ftp-url }
Command Default

No patches are uploaded or applied.

Parameters
apply
Applies a patch script.
script-name
Name of script.
script-options
Optional script parameters.
show
Displays applied or uploaded script lists.
applied-scripts
Displays applied patches list.
uploaded-scripts
Displays uploaded patches list.
uploadftp-url
Uploads the patch script from a remote FTP server. The FTP URL must be in the following format: ftp://<username>:<password>@<ftp-host>/<file-path>
Modes

Privileged EXEC mode

Usage Guidelines

New AP models and firmware updates are supported without the need to upgrade the controller image by using AP patch files. Use the command to view patch scripts already applied or uploaded, and upload and apply scripts as required. Once a patch script has been applied, it cannot be reapplied.

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

The no form of the command deletes a patch script. If the patch script is applied, it cannot be deleted.

Examples

The following example shows how to apply a patch file. 

device# patches
device(patches)# upload ftp://ruckus:admin@commscope.com/files/julypatch.patch
device(patches)# apply julypatch.patch
Parent topic: Commands O through Sh