auth-profile

Enters Authentication Service Profile configuration mode to configure authentication services.
Syntax
auth-profilename
no auth-profilename

After the auth-profile command is entered to enable the Authentication Service Profile configuration mode, the following configuration syntax is available:

[aaa-support|default{no-match-realm|no-realm}acct|descriptiontext|gpp-support|namename|realmrealm]

After the realm command is entered to enable the Authentication Service Profile Realm configuration mode, the following additional configuration syntax is available:

[auth-servicename|dynamic-vlanvlan-id|namename]
Command Default

Authentication services profiles are not created.

Parameters
aaa-support
Enables Hosted AAA Support.
default
Sets the default services.
no-match-realm
Sets the default service for when no matching realm is found.
no-realm
Sets the default service for when no realm is specified.
acct
Sets the default authentication service.
descriptiontext
Sets the description of the authentication service profile.
gpp-support
Configures the PLMN identifier.
namename
Sets the authentication service profile name.
realmrealm
Sets the authentication service realm.
auth-servicename
Sets the authentication service.
dynamic-vlanvlan-id
Sets the dynamic VLAN ID. Valid values range from 2 through 4094.
namename
Sets the authentication service realm name.
Modes

Global configuration mode

Usage Guidelines

This command is supported on the SmartZone 300 and vSZ-H controllers only.

The no form of the command removes configured authentication service profiles.

Examples

The following example creates an Authentication Service Profile and enters Authentication Service Profile configuration mode. 

device# configure
device(config) auth-profile aaa-auth
device(config-auth-profile)#

The following example removes all configured Authentication Service Profiles. 

device# configure
device(config) no auth-profile
Parent topic: Commands A through C