wlan-group

Creates or updates WLAN group configurations
Syntax
wlan-groupname
no wlan-group[name]

After the wlan-group command is entered to enter WLAN group configuration mode, the following configuration syntax is available:

{wlan-name|nasidnas-id|vlanvlan-tag|vlan-poolingvlan-name}
Command Default

No WLAN groups are configured.

Parameters
name
Specifies the WLAN group name.
wlan-name
Specifies the WLAN name.
nasidnas-id
Defines the ID sent to the RADIUS server, which identifies the AP.
vlanvlan-tag
Tags the WLAN traffic with a VLAN ID between 2 and 4094. By default, all client traffic will be assigned to the native (untagged) VLAN on the Ethernet port of the AP, which we represent as VLAN ID 1.
vlan-poolingvlan-name
Enables VLAN pooling with the specified VLAN IDs to be associated with the WLAN group.
Modes

AP group configuration mode

Domain configuration mode

Zone configuration mode

Usage Guidelines

This command is supported for SmartZone 100 devices.

The no form of the command deletes the WLAN group.

The wlan-group command is only visible after specific commands are entered. These commands include ap-group, domain, and zone.

Examples

The following example creates a WLAN group and specifies a WLAN to be associated with the group. Note that you must enter zone configuration mode to be able to configure the WLAN group. 

device# config
device(config)# zone zone-discovery
device(config-zone)# wlan-group wgroup3
device(config-wlan-group)# wlan wlan4

The following example removes a WLAN group configuration. 

device# config
device(config)# zone zone-discovery
device(config-zone)# no wlan-group wgroup3
Do you want to continue to delete (or input 'no' to cancel)? [yes/no] yes
Parent topic: Commands Si - Z