`usgv6`

Runs the US Government IPv6 (USGv6) automation tests.

Syntax

usgv6

no usgv6

After the usgv6 command is entered to enable USGv6 configuration mode, the following configuration syntax is available:

Command Default

The USGv6 automation tests are not run.

Parameters

backup-dns-config-n-modify dns-server: Backs up and modifies the configuration file for the specified DNS server
flush-v6-neigh device-name: Flushes IPv6 neighor's entries for the specified device.
ping6: Pings the IPv6 utility.
restart-device device-name: Restarts the specified device.
restore-dns-config: Restores the backup DNS configuration file.
set-dev-mtu device-name mtu-size: Sets the specified device and MTU size.

Modes

Privileged EXEC mode

Usage Guidelines

The no form of the command in configuration mode stops the USG automation tests.

This command is supported on the SmartZone Data Plane controllers only.

Examples

The following example runs the USGv6 automation tests and configures an MTU size of 1400 for device3.

device> enable 
device# usgv6 
device(usgv6)# set-dev-mtu device3 1400

usgv6