stats-upload

Updates the FTP server for uploading statistical data. If you add an FTP server to the controller, the controller will export statistics files to that FTP server, either on demand or based on a schedule.
Syntax
stats-upload

After the enable command is entered to update the FTP server, the following configuration syntax is available:

[ftp-servervalue|stats-intervalhourly|test]
Command Default

The command is disabled by default.

Parameters
ftp-server${value}
Specifies values for the FTP server.
stats-interval
Sets the interval at which the statistics are uploaded.
hourly
Sets the statistical data upload to occur hourly.
test
Tests the FTP server settings.
Modes

Global configuration mode

Usage Guidelines

This command is supported on the SmartZone 300 and vSZ-H controllers only.

The no enable command in Stats Upload configuration mode disables the statistical data upload to the FTP server.

Examples

The following example updates the ftp server for uploading statistical data with the statistical upload interval. 

device# config
device(config)# stats-upload 
device(config-stats-upload)# enable
device(config-stats-upload)# stats-interval weekly

The following example disables the statistical data uploads to the FTP server. 

device# config
device(config)# stats-upload 
device(config-stats-upload)# no enable
Do you want to continue to disable (or input 'no' to cancel)? [yes/no] yes
Successful operation
Parent topic: Commands Si - Z