ggsn-service

To create or update the APN resolution to GGSN/PGW configuration.
Syntax
ggsn-service [apn |dns-retry |dns-server |dns-timeout |request-timer|response-timer |retry ]
Command Default

No ggsn-service is created or updated.

Parameters
apn <name>
apn - Creates or updates the APN resolution to GGSN / PGW configuration.
name - Name of the APN.
dns-retry <number>
dns-retry - Sets the number of DNS retry.
<number> - Number of DNS retries.
dns-server <ip> priority [down | up ]
dns-server: Sets the DNS server.
<ip> DNS server IP address
priority [down | up ]: Change DNS server priority by moving the priority either up or down.
dns-timeout <seconds>
dns-timeout: Sets the DNS response timeout in seconds.
<seconds>: DNS response timeout.
request-timer <seconds>
request-timer: Sets the echo request timer in seconds.
<seconds>: Echo request timeout.
response-timer <seconds>
response-timer: Sets the echo response timer in seconds.
<seconds>: Echo response timeout.
retry <number>
retry: Sets the number of retries.
<number>: Number of retries.
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The below example displays options to create or update APN resolution to GGSN/PGW configuration.

device# config

device(config)# ggsn-service
apn               dns-retry         dns-server        dns-timeout       request-timer     response-timer    retry
Parent topic: Commands G through I