sci-profile

Enables the SCI profile settings.
Syntax
sci-profile profile-name
no sci-profile [ profile-name ]

After the sci-profile command is entered to enter SCI Profile configuration mode, the following configuration syntax is available:

{ host host-ip-address | password pwd | port port-number | system-id system-id | user user }
Command Default

SCI profile settings are not configured.

Parameters
host host-ip-address
Sets the SCI server host IP address.
password pwd
Sets the SCI server password.
port port-num
Sets the SCI server port number.
system-id system-id
Sets the SCI server system ID.
user user
Sets the SCI server user name.
Modes

Global configuration mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

The no form of this command without any options deletes all the configured SCI profiles. Use the profile-name to delete just one SCI profile.

Examples

The following example shows how to configure various SCI profile options. 

device# config
device(config)# sci-profile
device(config-sci-profile)# host 10.10.2.3
device(config-sci-profile)# password Jxyg123
device(config-sci-profile)# port 3
device(config-sci-profile)# system-id 12345 
device(config-sci-profile)# user usermktg
History
Release version Command history
3.5.1 This command was introduced.
Parent topic: Commands O through Sh