show client

Displays current AP associated client sessions.
Syntax
show client client-mac
Parameters
client-mac
Displays AP client sessions for the specified client MAC address.
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example shows output from the show client command. 

device# sshow client F2:AD:E0:A6:81:D3

   General Information
   -----------------------------------
   STA MAC Address             : F2:AD:E0:A6:81:D3
   IP Address                  : 10.206.84.55 / ::
   User Name                   : N/A
   Auth Method                 : Standard+Open
   Encryption Method           : None
   Connected Since             : 2021-03-30 07:09:07 GMT
   Status                      : AUTHORIZED
   AP Zone                     : zone1
   Access Point                : dhcp-10-206-84-82
   Model Name                  : Android 11
   Host Name                   : Galaxy-A50
   -----------------------------------
   Channel                     : 40
   VLAN                        : 1
   SNR (dB)                    : 65
   Packets from Client         : 9.7KB
   Bytes from Client           : 3.1MB
   Packets to Client           : 30.2KB
   Bytes to Client             : 37.3MB
   Dropped Packets to Client   : 0
   AP Rx Signal (db)           : 31
...
Parent topic: Show Commands