Verifying proper operation

After you have installed an external power supply, verify that the device is working properly by plugging it into a power source and verifying that it passes the self test.

  1. Connect the power cord supplied with the device to the power connector on the power supply on the rear of the device.
  2. Insert the other end into a properly grounded electrical outlet.
  3. Verify that the LED for the power supply is green.
  4. Verify proper operation by observing the LEDs.

    LEDs for linked ports will come on during the boot process, and then all LEDs will go off. Once the boot sequence is complete, LEDs for linked ports will come on again.

Parent topic: Installing the EPS4000