Changing the temperature warning level

To change the temperature at which the device sends a syslog message and an SNMP trap, enter the temperature warning stack-id value command at the privileged EXEC level of the CLI.

device# temperature warning 1 82

The stack-id variable can be a value from 1 through 12.

The value variable is the temperature warning level, in Celsius. You cannot set this level higher than the maximum value allowed by your device. The temperature warning level must be at least five degrees Celsius less than the temperature shutdown level, which is automatically set by the device.

The following console and syslog message is displayed when the temperature reaches the warning level: