Flush-front mounting

Caution: The device must be turned off and disconnected from the fabric during this procedure.
Note: The illustrations in the rack installation procedures show a 1U device, but the instructions are the same for a 2U device. The illustrations in the rack installation procedures are for reference only and may not show the actual device.

Complete the following tasks to install the device in a four-post rack:

  1. Attaching the front brackets
  2. Attaching the bracket extensions to the device
  3. Installing the device in the rack
  4. Attaching the rear brackets to the extensions
  5. Attaching the rear brackets to the rack posts

In this section:

  1. Attaching the front brackets
  2. Attaching the extension brackets to the device
  3. Installing the device in the rack
  4. Attaching the rear brackets to the extensions
  5. Attaching the rear brackets to the rack posts
Parent topic: Installing the Universal Four-Post Rack Kit (XBR-R000296)