Attaching the extension brackets to the device
Complete the following steps to attach the extension brackets to the device. There are medium and long extension brackets that you can use for this step. Choose the correct extension bracket for the depth of your rack.
- Select the proper length extension bracket for your rack depth.
- Position the right extension bracket along the side of the device as shown in Attaching the extension brackets to the device.
- Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the extension bracket and then into the holes on the side of the device. Use the upper and lower screw holes, leaving the center holes empty.
- Repeat step 1 and step 2 to attach the left extension bracket to the left side of the device.
- Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg).
