RUCKUS ICX 7250 Switch Technical Specifications

This content highlights the features and specifications for the RUCKUS ICX 7250 switch.

System specifications

System component Description

Enclosure

1U; 19-inch rack-mountable; desktop- or wall-mountable

Power inlet

C14 for AC power

Custom connector for DC power from EPS4000 (not available on the ICX 7250-24G)

Power supplies

Integrated AC power supply for system and PoE power

External AC power supply (EPS4000) for redundant system power and extended PoE/PoE+ power (not applicable to the ICX 7250-24G). DC power supplied to the switches depends on the EPS4000 configuration.

Fans

ICX 7250-24G: One fan per device

ICX 7250-24 : One fan per device

ICX 7250-24P: Two fans per device

ICX 7250-48: Two fans per device

ICX 7250-48P: Three fans per device

Cooling

Forced air circulation

ICX 7250-24G: front-to-back airflow

All other models: sides-to-back airflow

System architecture

Edge Ethernet switches

ICX 7250-24G: SFP uplink ports

ICX 7250-24, ICX 7250-24P, ICX 7250-48, ICX 7250-48P: SFP+ uplink and stacking ports

ICX 7250-24P, ICX 7250-48P: PoE/PoE+ ports

Ethernet

System component Description

Ethernet ports

ICX 7250-24G: 24 RJ-45 GbE, 4 SFP GbE

ICX 7250-24: 24 RJ-45 GbE, 8 SFP+ 10 GbE

ICX 7250-24P: 24 RJ-45 GbE with PoE/PoE+, 8 SFP+ 10 GbE

ICX 7250-48: 48 RJ-45 GbE, 8 SFP+ 10 GbE

ICX 7250-48P: 48 RJ-45 GbE with PoE/PoE+, 8 SFP+ 10 GbE

Management interface

One 10/100/1000 Ethernet, out-of-band management interface (RJ-45 port)

LEDs

System component Description

Port status LEDs

RJ-45: Indicates Ethernet link status and speed

PoE/PoE+: Indicates if a port is providing PoE or PoE+ power to a connected device

SFP/SFP+: Indicates link status and speed for SFP or SFP+ ports

Out-of-band management port: Two single-color LEDS indicate out-of-band management port link status and speed

System status LEDs

PWR: Bicolor LED (green/amber) indicates the internal power status

DIAG: Bicolor LED (green/amber) controlled by software to indicate the system is in diagnostic mode

Note: The following LEDs are not available on the ICX 7250-24G.

EPS1: Bicolor LED (green/amber) indicates if the external power supply (EPS1) is operating normally

EPS2 (available only on the ICX 7250-48P): Bicolor LED (green/amber) indicates if the external power supply (EPS2) is operating normally

MS: Bicolor LED (green/amber) controlled by software to indicate master/slave status in stacking mode

UPLINK: Software-controlled LED (green) to indicate stacking uplink port status

DOWNLINK: Software-controlled LED (green) to indicate stacking uplink port status

(Stack) ID: Ten LEDs (green) to display stacking ID from 1 to 19. The LED marked 10+ is used in conjunction with the others (1 through 9) to indicate stacking IDs 11 to 19.

Note: For those devices that support stacking, the maximum stack size is 12 units.

Other

System component Description

RESET

Reset button for hardware reset without power cycling. There is a hole in the front panel to allow access.

Mini-USB port

Console port for serial access to the device for management

USB port

Standard type-A USB connector for removable media

Serial cable

Mini-USB to RJ-45 console cable: BPN 50-1000122-01

RJ-45 connector

2x6 stacked RJ-45 connectors for GbE data ports

Weight and physical dimensions

Model Height Width Depth Weight

ICX 7250-24G

4.37 cm

1.72 in

44.0 cm

17.32 in

28 cm

11 in

3.6 kg

7.9 lb

ICX 7250-24

4.37 cm

1.72 in

44.0 cm

17.32 in

28 cm

11 in

3.8 kg

8.4 lb

ICX 7250-24P

4.37 cm

1.72 in

44.0 cm

17.32 in

28 cm

11 in

4.7 kg

10.3 lb

ICX 7250-48

4.37 cm

1.72 in

44.0 cm

17.32 in

37 cm

14.6 in

4.8 kg

10.6 lb

ICX 7250-48P

4.37 cm

1.72 in

44.0 cm

17.32 in

37 cm

14.6 in

5.9 kg

13.0 lb

Environmental requirements

Condition Operational Non-operational

Ambient temperature

-5°C to 50°C (23°F to 122°F)

-25°C to 70°C (-13°F to 158°F)

Relative humidity (non-condensing)

5% to 95% at 50°C (122°F)

5% to 95% at 70°C (158°F)

Altitude (above sea level)

0 to 3,000 m (10,000 feet)

0 to 12,000 m (39,000 feet)

Shock

20 G, 11 ms, half-sine wave

33 G, 11 ms, half-sine wave

Vibration

1 G sine, 0.4 gms random, 5-500 Hz

2.4 G sine, 1.1 gms random, 5-500 Hz

Airflow

ICX 7250-24G: 14.3 CFM (Maximum), 5.7 CFM (Typical)

ICX 7250-24 : 14.0 CFM (Maximum), 5.7 CFM (Typical)

ICX 7250-24P: 34.4 CFM (Maximum), 13.7 CFM (Typical)

ICX 7250-48: 34.8 CFM (Maximum), 13.8 CFM (Typical)

ICX 7250-48P: 45.2 CFM (Maximum), 21.4 CFM (Typical)

N/A

Heat dissipation

Refer to Power Consumption specification sections

N/A

Operating noise

ICX 7250-24G: 40 dBA

ICX 7250-24: 41.9 dBA

ICX 7250-24P: 44.7 dBA

ICX 7250-48: 44.5 dBA

ICX 7250-48P: 45.9 dBA

N/A

Power supply specifications (per PSU)

The EPS4000 and its power supply modules (RPS17) are field-replaceable. All other RUCKUS ICX 7250 power supply units (PSUs) are fixed and internal to the devices. All the PSUs use a C14 inlet and connect to standard AC power.

Note: The EPS4000 must have at least one RPS17 installed to provide power to the supported RUCKUS ICX 7250 devices.

Device Maximum output power rating (DC) Input voltage Input line frequency Maximum input current Input line protection Maximum inrush current

ICX 7250-24G

ICX 7250-24

65 W

100 - 240 VAC

(nominal)

90 - 264 VAC

(range)

50/60 Hz

(nominal)

47 - 63 Hz

(range)

1.5 A (rms)

Line fused

40 A at 115 VAC

80 A at 230 VAC

Cold start @ 25°C

ICX 7250-24P

525 W

100 - 240 VAC

(nominal)

90 - 264 VAC

(range)

50/60 Hz

(nominal)

47 - 63 Hz

(range)

6 A (rms)

Line fused

30 A at 115 VAC

60 A at 230 VAC

Cold start @ 25°C

ICX 7250-48

100 W

100 - 240 VAC

(nominal)

90 - 264 VAC

(range)

50/60 Hz

(nominal)

47 - 63 Hz

(range)

2.0 A (rms)

Line fused

65 A at 115 VAC

130 A at 230 VAC

Cold start @ 25°C

ICX 7250-48P

880 W

100 - 240 VAC

(nominal)

90 - 264 VAC

(range)

50/60 Hz

(nominal)

47 - 63 Hz

(range)

10.8 A (rms)

Line and neutral fused

60 A at 115 VAC

120 A at 230 VAC

Cold start @ 25°C

EPS4000

920 W (per installed PSU)

100 - 240 VAC

(nominal)

90 - 264 VAC

(range)

50/60 Hz

(nominal)

47 - 63 Hz

(range)

13 A (rms)

Line and neutral fused

75 A at 230 VAC

Cold start @ 25°C

Power consumption (idle configuration)

Idle: No optics or connections to ports installed and system booted up. Fans at nominal speed.

Note: The RUCKUS ICX 7250 does not support -48 VDC input power.
Model name @100 VAC input @200 VAC input @-48 VDC input Minimum number of power supplies Notes

ICX 7250-24G

0.56 A

33.6 W

114.7 BTU/hr

0.35 A

33.3 W

113.5 BTU/hr

N/A

1

All ports down, no optics or cables connected.

No Load (traffic)

ICX 7250-24

0.71 A

42.6 W

145.4 BTU/hr

0.41 A

39.0 W

132.9 BTU/hr

N/A

1

All ports down, no optics or cables connected.

No Load (traffic)

ICX 7250-24P

0.5 A

48.0 W

163.8 BTU/hr

0.36 A

48.0 W

163.8 BTU/hr

N/A

1

All ports down, no optics or cables connected.

No Load (traffic)

ICX 7250-48

0.51 A

50.6 W

172.8 BTU/hr

0.28 A

51.1 W

174.3 BTU/hr

N/A

1

All ports down, no optics or cables connected.

No Load (traffic)

ICX 7250-48P

0.73 A

70.8 W

241.6 BTU/hr

0.46 A

70.8 W

241.6 BTU/hr

N/A

1

All ports down, no optics or cables connected.

No Load (traffic)

Power consumption (typical configuration)

Typical: 10% traffic rate on all ports with 64-byte packet size and random payload at room temperature. All ports fully configured. Fans at nominal speed.

Note: The RUCKUS ICX 7250 does not support -48 VDC input power.
Model name @100 VAC input @200 VAC input @-48 VDC input Minimum number of power supplies Notes

ICX 7250-24G

0.71 A

42.6 W

216.9 BTU/hr

0.42 A

39.9 W

136.2 BTU/hr

N/A

1

24 1-GbE and 4 10-GbE ports are linked UP ONLY.

10% traffic.

ICX 7250-24

0.86 A

51.6 W

176.1 BTU/hr

0.52 A

49.4 W

168.6 BTU/hr

N/A

1

24 1-GbE and 8 10-GbE ports are linked UP ONLY.

10% traffic.

ICX 7250-24P

4.46 A

441.0 W

1505.2 BTU/hr

2.18 A

428.0 W

1460.8 BTU/hr

N/A

1

24 1-GbE and 8 10-GbE ports are linked UP ONLY.

10% traffic.

100% PoE Load @ Class 3 (15.4 W/port)

ICX 7250-48

0.64 A

63.6 W

216.9 BTU/hr

0.34 A

61.1 W

208.6 BTU/hr

N/A

1

48 1-GbE and 8 10-GbE ports are linked UP ONLY.

10% traffic.

ICX 7250-48P

9.23 A

920.0 W

3140.0 BTU/hr

4.43 A

862.0 W

2942.1 BTU/hr

N/A

1

48 1-GbE and 8 10-GbE ports are linked UP ONLY.

10% traffic.

100% PoE Load @ Class 3 (15.4 W/port)

Power consumption (maximum configuration)

Maximum: All ports fully configured with connection and traffic at maximum throughput. Fans at high speed.

Note: The RUCKUS ICX 7250 does not support -48 VDC input power.
Model name @100 VAC input @200 VAC input @-48 VDC input Minimum number of power supplies Notes

ICX 7250-24G

0.74 A

44.4 W

151.5 BTU/hr

0.45 A

42.3 W

144.3 BTU/hr

N/A

1

24 1-GbE and 4 10-GbE ports are linked UP ONLY.

100% traffic.

ICX 7250-24

0.96 A

57.6 W

196.6 BTU/hr

0.57 A

54.2 W

184.8 BTU/hr

N/A

1

24 1-GbE and 8 10-GbE ports are linked UP ONLY.

100% traffic.

ICX 7250-24P

4.56 A

454.0 W

1549.5 BTU/hr

2.24 A

439.0 W

1498.3 BTU/hr

N/A

1

24 1-GbE and 8 10-GbE ports are linked UP ONLY.

100% traffic.

100% PoE Load @ Class 3 (15.4 W/port)

ICX 7250-48

0.70 A

69.5 W

237.2 BTU/hr

0.38 A

69.3 W

236.6 BTU/hr

N/A

1

48 1-GbE and 8 10-GbE ports are linked UP ONLY.

10% traffic.

ICX 7250-48P

9.45 A

942.0 W

3215.1 BTU/hr

4.49 A

880.0 W

3003.5 BTU/hr

N/A

1

48 1-GbE and 8 10-GbE ports are linked UP ONLY.

10% traffic.

100% PoE Load @ Class 3 (15.4 W/port)

Data port specifications (Ethernet)

Note: The ICX 7250 10G ports provide a combination of active and passive cable support. Ports 1/2/1 to 1/2/4 can only be used with active cables when used for uplinks and either passive or active when used for stacking. Ports 1/2/5 to 1/2/8 can be used with either active or passive cable for any connection type.
Model Port type Number of ports Description

ICX 7250-24G

GbE (copper)

24

RJ-45 10/100/1000 ports

GbE (optical)

4

SFP uplink ports

ICX 7250-24

GbE (copper)

24

RJ-45 10/100/1000 ports

10 GbE (optical)

8

Uplink or stacking SFP+ ports

ICX 7250-24P

GbE (copper)

24

RJ-45 10/100/1000 ports

10 GbE (optical)

8

Uplink or stacking SFP+ ports

ICX 7250-48

GbE (copper)

48

RJ-45 10/100/1000 ports

10 GbE (optical)

8

Uplink or stacking SFP+ ports

ICX 7250-48P

GbE (copper)

48

RJ-45 10/100/1000 ports

10 GbE (optical)

8

Uplink or stacking SFP+ ports

Serial port specifications (pinout mini-USB)

Pin Signal Description

1

Reserved

Not used

2

UART_RX

Receive data by RUCKUS ICX 7250

3

UART_TX

Transmit data by RUCKUS ICX 7250

4

Reserved

Not used

5

GND

Logic ground

Serial port specifications (protocol)

Parameter Value

Baud

9600 bps

Data bits

8

Parity

None

Stop bits

1

Flow control

None

Memory specifications

Memory Type Size

Boot

SPI Flash

2 x 8 MB

Compact Flash

NAND

2 GB

Main

DDR3 (onboard IC)

ICX 7250-24G: 1 GB

ICX 7250-24: 2 GB

ICX 7250-24P: 2 GB

ICX 7250-48: 2 GB

ICX 7250-48P: 2 GB

Use the following EMC list for legacy products qualified before September 2016. Check with Safety/Regulatory team as to which list needs to be used.

Regulatory compliance (EMC)

  • FCC Part 15, Subpart B (Class A)
  • EN 55022 (CE mark) (Class A)
  • EN 55024 (CE mark) (Immunity) for Information Technology Equipment
  • ICES-003 (Canada) (Class A)
  • AS/NZ 55022 (Australia) (Class A)
  • VCCI (Japan) (Class A)
  • EN 61000-3-2
  • EN 61000-3-3
  • EN 61000-6-1
Use the following Safety list for legacy products qualified before September 2016. Check with Safety/Regulatory team as to which list needs to be used.

Regulatory compliance (safety)

  • CAN/CSA-C22.2 No. 60950/UL 60950
  • EN 60825 Safety of Laser Products
  • EN 60950/IEC 60950 Safety of Information Technology Equipment
  • CNS 14336-1 (BSMI) (Taiwan)
This list is common for all products.

Regulatory compliance (environmental)

  • 2011/65/EU - Restriction of the use of certain hazardous substance in electrical and electronic equipment (EU RoHS).
  • 2012/19/EU - Waste electrical and electronic equipment (EU WEEE).
  • 94/62/EC - packaging and packaging waste (EU).
  • 2006/66/EC - batteries and accumulators and waste batteries and accumulators (EU battery directive).
  • 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (EU REACH).
  • Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 - U.S. Conflict Minerals.
  • 30/2011/TT-BCT - Vietnam circular.
  • SJ/T 11363-2006 Requirements for Concentration Limits for Certain Hazardous Substances in EIPs (China).
  • SJ/T 11364-2006 Marking for the Control of Pollution Caused by EIPs (China).
  • CNS 15663 (BSMI) (Taiwan)