You can use the built-in management functions of the device to monitor the topology,
port status, physical status, and other information that help you analyze the switch
performance, and to accelerate system debugging. The device automatically performs
power-on self-test (POST) each time it is turned on. Errors, if any, are recorded
in the syslog messages.
You can manage the device using any of the management options listed in the following
table.
Management options for the device
Management tool
Out-of-band support
Reference documents
Command line interface (CLI)
Ethernet, serial connection, or USB console
RUCKUS FastIron Command Reference guide
Feature-based Configuration Guides
SmartZone
Ethernet or connection via IP address
Ruckus SmartZone 100 and Virtual SmartZone-Essentials Administrator Guide
Standard SNMP applications
Ethernet or serial connection
Ruckus FastIron MIB Reference
Ruckus FastIron Web Management Interface
Ethernet or connection via IP address
RUCKUS FastIron Web Management Interface User Guide
Note: Not all
FastIron features are supported through the web management interface.
Brocade Network Advisor (BNA)
Note: Effective November 30, 2018, the Brocade Network Advisor for managing Ruckus switches
and Access Points has gone End of Sale. Ruckus recommends that you use Ruckus SmartZoneOS
5.