Specifying a stacking port

The port address format is stack-unit/slot/port:

  • stack-unit: Specifies the stack unit ID. For models that support stacking, the range is from 1 through the maximum number of devices (units) that can be supported in the stack.
  • slot: Specifies the slot number. Stacking ports are in slot 2.
  • port: Specifies the port number in the slot.

The following example shows how to specify stacking port 3 in slot 2 of unit 3 in a stack: 

device (config)# interface ethernet 3/2/3
Parent topic: Specifying a port address