10G-SFPP-TX-A Transceiver Support
The 10G-SFPP-TX-A transceiver consumes
significantly more power than typical 10G transceivers. This section provides guidelines
for
deploying the 10G-SFPP-TX-A transceiver within the power capabilities of the supported
RUCKUS ICX 7250 switches.
If the guidelines in this section are not followed, there is a risk of system instability and/or reboot.
Adhere to the guidelines in the following table to avoid a power violation.
For each 10G-SFPP-TX-A installed, another SFP+ slot MUST be left empty.
For example: If you are using four 10G-SFPP-TX-A, you must leave four SFP+ ports empty.