ESD Precautions
First section should contain shared notices for all devices
Danger: For
safety reasons, the ESD wrist strap should contain a series 1 megohm resistor.
Caution: Before plugging a cable into any port, be sure to discharge the voltage stored on
the cable by touching the electrical contacts to ground surface.
Caution: Static electricity can damage the chassis and other electronic devices. To avoid
damage, keep static-sensitive devices in their static-protective packages until you
are ready to install them.
Note: Wear a wrist grounding strap connected to the chassis ground (if the device is plugged
in) or to a bench ground.
subsequent sections to contain device-specific notices. Then conditonalize these sections
or individual notices.