RUCKUS ICX 7550 Switch Hardware Installation Guide
- 1 Vistance Legal Statements
- Preface Ruckus
- 5 Device Overview
- 6 Preparing for the Installation
- 6.1 Safety Precautions
- 6.1.1 General Precautions
- 6.1.2 ESD Precautions
- 6.1.3 Power Precautions
- 6.1.4 Lifting and Weight-Related Precautions
- 6.1.5 Laser Precautions
- 6.2 Facility Requirements
- 6.3 Quick Installation Checklists
- 6.4 Shipping Carton Contents
- 6.1 Safety Precautions
- 7 Mounting the Device
- 7.1 Mounting Options
- 7.2 Precautions Specific to Mounting
- 7.3 Removing Port Covers
- 7.4 Mounting on a Desktop or Flat Surface
- 7.5 Two-Post Rack Mount Installation (ICX7000-RMK)
- 7.6 Two-Post Rack Mount Installation (ICX-RMK-4POST-TL)
- 7.6.1 Flush-Front Mounting
- 7.7 Four-Post Rack Mount Installation (ICX-RMK-4POST-TL)
- 7.7.1 Flush-Front Mounting
- 7.8 Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295)
- 7.8.1 Time and Items Required
- 7.8.2 Parts List
- 7.8.3 Flush-Front Mounting the Device in a Rack
- 7.8.4 Flush-Rear (Recessed) Mounting the Device in
the Rack
- 7.8.4.1 Front Brackets to the Rear of the Device
- 7.8.4.2 Attaching the Bracket Extensions to the Front of the Device
- 7.8.4.3 Installing the Device in the Rack
- 7.8.4.4 Attaching the Rear Brackets to the Bracket Extensions at the Front of the Device
- 7.8.4.5 Attaching the Rear Brackets to the Front Rack Posts
- 8 Connecting ICX 7550 Devices in a Stack
- 9 Initial Setup and Verification
- 9.1 Items Required
- 9.2 Providing Power to the Device
- 9.3 Establishing a First-Time Connection to the Console Port
- 9.4 Port Statistics Clearing Behavior
- 9.5 Configuring an IP Address for the Device
- 9.6 Customizing the Host name and Chassis Name
- 9.7 Setting the Date and Time
- 9.8 Establishing a Connection to the Out-of-Band Management Port
- 9.9 Getting In-Band Access
- 9.10 Verifying the Correct Operation
- 9.11 Backing Up the Running Configuration
- 10 Installing Transceivers and Cables
- 10.1 Items Required
- 10.2 Precautions Specific to Transceivers and Cables
- 10.3 Managing Cables
- 10.4 Installing the Ethernet RJ-45 Cables
- 10.5 Cleaning the Fiber-Optic Connectors
- 10.6 Installing a New Fiber-Optic Transceiver
- 10.7 Cabling a Fiber-Optic Transceiver
- 10.8 Replacing a Fiber-Optic Transceiver
- 10.9 Long-Reach Multimode Adapter Module
- 11 Monitoring the Device
- 11.1 Interpreting Port-Side LEDs
- 11.1.1 Status Mode Selection Button and STATUS
LEDs
- 11.1.1.1 Port Link Status Mode (STAT) LED
- 11.1.1.2 Port Speed Status Mode (SPD) LED
- 11.1.1.3 Member ID Status Mode (ID) LED
- 11.1.1.4 Status Mode (USB) LED
- 11.1.1.5 Status Mode (PoE) LED (N/A for Non-PoE)
- 11.1.2 System Status (SYS) LED
- 11.1.3 Master/Slave Status (MS) LED
- 11.1.4 Software Update Status (UPDATE) LED
- 11.1.5 Diagnostics Status (DIAG) LED
- 11.1.6 Cloud/On-premises-SmartZone management status LED
- 11.1.7 Power Status (PWR1 and PWR2) LEDs
- 11.1.1 Status Mode Selection Button and STATUS
LEDs
- 11.2 Interpreting Nonport-Side LEDs
- 11.3 Pinging an IP Address
- 11.4 Tracing a Route
- 11.5 Digital Optical Monitoring
- 11.6 Monitoring Power and Cooling
- 11.1 Interpreting Port-Side LEDs
- 12 Power Supplies
- 12.1 Power Supply Overview
- 12.2 Precautions Specific to Power Supplies
- 12.3 Identifying the Airflow Direction
- 12.4 Time and Items Required
- 12.5 Replacing a Power Supply
- 12.6 Inserting a New AC Power Supply
- 12.7 Installing the AC Power Cord Strap
- 12.8 Inserting a New DC Power Supply
- 12.9 Grounding the RUCKUS ICX 7550 Switch
- 13 Fan Assemblies
- 14 Expansion Modules
- 15 RUCKUS ICX 7550 Switch Technical Specifications
- 16 Regulatory Statements
- 17 Cautions and Danger Notices
- 17.1 Cautions
- 17.2 Danger Notices