| ruckusTrafficPolicyMIB 1.3.6.1.4.1.1991.1.1.3.51
|
Not-accessible |
The MIB module that gives the traffic
policy information. |
| ruckusTrafficPolicy 1.3.6.1.4.1.1991.1.1.3.51.1
|
Not-accessible |
The entry for traffic
policy information.
|
| ruckusTrafficPolicyTable 1.3.6.1.4.1.1991.1.1.3.51.1.1 Syntax: SEQUENCE OF
RuckusTrafficPolicyEntry
|
Not-accessible |
This table lists various traffic policies
configured in the system. Each entry corresponds to a specific traffic
policy and includes important details such as the policy's name, type,
rate limiting configurations, and other associated parameters. The table
manages and retrieves the configurations for each traffic policy;
however, direct access to the table itself is not permitted through SNMP
GET or SET operations. |
| ruckusTrafficPolicyEntry 1.3.6.1.4.1.1991.1.1.3.51.1.1.1 Syntax:
RuckusTrafficPolicyEntry
|
Not-accessible |
This entry in the traffic policy table represents a
specific configuration of a traffic policy. Each entry corresponds to a
unique traffic policy identified by the ruckusTrafficPolicyName
index. It contains detailed information about the traffic policy,
including its type, rate limits, associated actions, and other
parameters relevant to the policy's operation. The access to individual
entries in the table is not permitted through SNMP Get
operations. |
| ruckusTrafficPolicyName 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.1 Syntax:
TrafficPolicyName
|
Read-only |
The name of the traffic policy entry uniquely identifies a traffic
policy within the system. |
| ruckusTrafficPolicyType 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.2 Syntax:
TrafficPolicyType
|
Read-only |
The configured traffic policy type in the system specifies whether it
is based on byte counts or packet counts.
|
| ruckusTrafficPolicyRateLimitType 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.3 Syntax:
TrafficPolicyRateLimitType
|
Read-only |
Describes the type of rate limiting applied to the traffic policy. It
specifies whether the rate limiting is adaptive or fixed. Adaptive rate
limiting adjusts dynamically according to traffic conditions, while
fixed rate limiting maintains a constant rate regardless of fluctuations
in traffic. |
| ruckusTrafficPolicyCIR 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.4 Syntax:
Unsigned32
|
Read-only |
Specifies the Committed Information Rate (CIR) defined for the
traffic policy. The CIR indicates the average bandwidth rate measured in
bits per second that the traffic policy guarantees for a specific
traffic flow. This rate represents the amount of data that can be
transmitted under normal network conditions, ensuring a consistent level
of service for traffic that complies with this policy. |
| ruckusTrafficPolicyCBS 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.5 Syntax:
Unsigned32
|
Read-only |
Specifies the Committed Burst Size (CBS) for the
traffic policy. The CBS indicates the maximum amount of data that can be
sent in bursts at the Committed Information Rate (CIR) before congestion
control measures are applied. Typically measured in bytes, the CBS
represents the amount of data that can exceed the CIR in short
bursts. |
| ruckusTrafficPolicyPIR 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.6 Syntax:
Unsigned32
|
Read-only |
Specifies the Peak Information Rate (PIR) for the
traffic policy. It refers to the maximum rate at which traffic can flow
beyond the Committed Information Rate (CIR) during peak usage times. It
is usually measured in bytes or bits per second and signifies the upper
limit of traffic flow during periods of high demand. |
| ruckusTrafficPolicyPBS 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.7 Syntax:
Unsigned32
|
Read-only |
Specifies the Peak Burst Size (PBS) for the traffic
policy. It defines the maximum amount of traffic that is allowed to
exceed the Committed Information Rate (CIR) during bursts at peak times,
in conjunction with the Peak Information Rate (PIR). The PBS ensures
that excess traffic can be accommodated during brief periods of high
demand without overwhelming the network. |
| ruckusTrafficPolicyCounter 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.8 Syntax:
TruthValue
|
Read-only |
Indicates whether traffic accounting is enabled for a
specific traffic policy. This object returns a `truthValue` that shows
whether the policy is actively tracking traffic counts for its rules.
This information can be used to monitor if the traffic accounting
features are operational within the traffic policy. |
| ruckusTrafficPolicyExceedActionType 1.3.6.1.4.1.1991.1.1.3.51.1.1.1.9 Syntax:
TrafficPolicyExceedActionType
|
Read-only |
Specifies the actions that are implemented when network traffic
exceeds the limits defined by the traffic policy. The type of action
taken is specified by the `TrafficPolicyExceedActionType`, which
determines how packets are managed when they exceed pre-defined
thresholds, such as the Committed Information Rate (CIR) or Peak
Information Rate (PIR). |