You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS FastIron MIB Reference, 10.0.20 53-1005806-05

Traceroute Result Table Objects MIB

MIB objects

Objects and OID	Access	Description
traceRouteCtlOwnerIndex Syntax: SnmpAdminString (SIZE(0..32))	None	This first index for the entry in traceRouteCtlTable. The value is textually mapped to a securityName or groupName defined in VACM.
traceRouteCtlTestName Syntax: SnmpAdminString (SIZE(0..32))	None	The name of the traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex.
traceRouteResultsOperStatus Syntax: Integer	Read-only	Reflects the operational state of a traceRouteCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped. completed(3) - Test is completed Note: If the traceroute test has not started, the return value is 0.
traceRouteResultsCurHopCount Syntax: Gauge32	Read-only	The current TTL value (from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by traceRouteCtlMaxTtl.
traceRouteResultsCurProbeCount Syntax: Gauge32	Read-only	The current probe count (1..10) for a remote traceroute operation.
traceRouteResultsIpTgtAddrType Syntax: InetAddressType	Read-only	Indicates the type of address stored in the corresponding traceRouteResultsIpTgtAddr object. Note: Return value is always unknown(0).
traceRouteResultsIpTgtAddr Syntax: InetAddress	Read-only	Reports the IP address associatedwith a traceRouteCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object will be a zero-length octet string when a DNS name is not specified or when a specified DNS name fails to resolve. Note: Return value is always Null.
traceRouteResultsTestAttempts Syntax: Gauge32	Read-only	The current number of attempts to determine a path to a target. The value of this object must be started at 0.
traceRouteResultsTestSuccesses Syntax: Gauge32	Read-only	The current number of attempts to determine a path to a target that have succeeded. The value of this object must be reported as 0 when no attempts have succeeded.
traceRouteResultsLastGoodPath Syntax: DateAndTime	Read-only	The date and time when the last complete path was determined. A path is complete if responses were received or timeout occurred for each hop on the path.

History

Release version	History
08.0.80a	This MIB was introduced.

Did you find what you were looking for?