General trace route group

The following objects define the trace route probe packet.

Name, OID, and Syntax

Access

Description

snRtIpTraceRoute

1.3.6.1.4.1.1991.1.2.2.10

 None  
snRtIpTraceRouteGeneral

1.3.6.1.4.1.1991.1.2.2.10.1

None

Shows the general IP address of the trace route.

snRtIpTraceRouteTargetAddr

1.3.6.1.4.1.1991.1.2.2.10.1.1

Syntax: IpAddress

Read-write

Shows the target IP address of the trace route.

snRtIpTraceRouteMinTtl

1.3.6.1.4.1.1991.1.2.2.10.1.2

Syntax: Integer

Read-write

Indicates the minimum TTL value carried in the first probe packet.

Valid values: 1 - 255 seconds

Default: 1 second

snRtIpTraceRouteMaxTtl

1.3.6.1.4.1.1991.1.2.2.10.1.3

Syntax: Integer

Read-write

Indicates the maximum TTL value carried in the last probe packet.

Valid values: 1 - 255 seconds.

Default: 30 seconds

snRtIpTraceRouteTimeOut

1.3.6.1.4.1.1991.1.2.2.10.1.4

Syntax: Integer

Read-write

Indicates the number of seconds the Layer 3 Switch waits for a response from the probe packet (i.e. the ICMP packet) before timing out.

Valid values: 1 - 120 seconds.

Default: 2 seconds

snRtIpTraceRouteControl

1.3.6.1.4.1.1991.1.2.2.10.1.5

Syntax: Integer

Read-write

Indicates the progress of the trace route:

  • start(1) - snRtIpTraceRouteDestAddr must have been initialized before start(1) can be written.
  • abort(2) - Stops the current trace route operation.
  • success(3) - The destination address is reached.
  • failure(4) - Either the destination address is not reach, trace route times out, or the ending TTL is reached before the operation is completed.
  • inProgress(5) - Trace route operation has started.

Only "start" and "abort" are writable values; whereas, "success", "failure" and "inProgress" are read-only (or returned) values.

The Trace route result table contains the routes and target addresses.

Parent topic: Trace route group