|
ruckusBgpEvpn
1.3.6.1.4.1.1991.1.2.18
|
Read-only |
The initial version to support the BGP Ethernet Virtual Private
Network (EVPN) feature. |
| ruckusBgpEvpnCommonParameters 1.3.6.1.4.1.1991.1.2.18.1 Syntax: Sequence of
ruckusBgpEvpnEncapsulationType
|
Read-only |
Describes the BGP EVPN parameters. |
| ruckusBgpEvpnEncapsulationType 1.3.6.1.4.1.1991.1.2.18.1.1 Syntax: INTEGER {
none (1), plannedOnly (2), plannedAndUnplanned (3) }
|
Read-only |
Describes the BGP EVPN encapsulation type. The values are: 1 -
none , 2 - plannedOnly, and 3 - plannedAndUnplanned
|
| ruckusBgpEvpnInstanceTable 1.3.6.1.4.1.1991.1.2.18.2
Syntax: Sequence of ruckusBgpEvpnInstanceEntry
|
Read-only |
This table contains information about the properties of an EVPN
instance. Table entries are per EVPN instance. |
| ruckusBgpEvpnInstanceEntry 1.3.6.1.4.1.1991.1.2.18.2.1 Syntax:
ruckusBgpEvpnInstanceEntry |
Read-only |
Entry containing information about an EVPN instance. |
| ruckusBgpEvpnInstanceId 1.3.6.1.4.1.1991.1.2.18.2.1.1
Syntax: Integer32
|
Read-only |
The EVPN instance ID is used to identify the EVPN instance
configured. |
| ruckusBgpEvpnRouteDistinguisher
1.3.6.1.4.1.1991.1.2.18.2.1.2 Syntax: OCTET STRING (SIZE
(0..256))
|
Read-only |
The route distinguisher information per instance ID. |
| ruckusBgpEvpnInstanceVniId 1.3.6.1.4.1.1991.1.2.18.2.1.3
Syntax: Integer32
|
Read-only |
Describes the VNI ID configured on an EVPN instance. |
| ruckusBgpEvpnInstanceVlan 1.3.6.1.4.1.1991.1.2.18.2.1.4 Syntax:
Integer32 |
Read-only |
Describes the VLAN mapped to a VNI ID. |
| ruckusBgpEvpnArpProxy 1.3.6.1.4.1.1991.1.2.18.2.1.5 Syntax:
TruthValue |
Read-only |
Describes the ARP-proxy status on an EVPN instance. This value is
true if ARP-proxy is enabled. |
| ruckusBgpEvpnArpSuppression
1.3.6.1.4.1.1991.1.2.18.2.1.6 Syntax: TruthValue |
Read-only |
Describes the ARP-suppression status on an EVPN instance. |
| ruckusBgpEvpnNdProxy 1.3.6.1.4.1.1991.1.2.18.2.1.7 Syntax:
TruthValue
|
Read-only |
Describes the ND-proxy status on an EVPN instance. |
| ruckusBgpEvpnNdSuppression
1.3.6.1.4.1.1991.1.2.18.2.1.8 Syntax: TruthValue |
Read-only |
The ND suppression status on an EVPN instance. |
| ruckusBgpEvpnFloodUnknownUnicastSupression 1.3.6.1.4.1.1991.1.2.18.2.1.9 Syntax:
TruthValue
|
Read-only |
Unknown unicast suppression status on an EVPN instance. |
| ruckusBgpEvpnInstanceLocalEndPoint
1.3.6.1.4.1.1991.1.2.18.2.1.10 Syntax: IpAddress |
Read-only |
The local IP address of the EVPN connection. |
| ruckusBgpEvpnInstanceState
1.3.6.1.4.1.1991.1.2.18.2.1.11 Syntax: INTEGER { INIT(1), DOWN(2),
and UP (3) } |
Read-only |
Describes the connection state of the EVPN instance. Values are:
1 - INIT, 2 - DOWN, and 3 - UP
|
| ruckusBgpEvpnInstanceMacDuplicationLimit
1.3.6.1.4.1.1991.1.2.18.2.1.12 Syntax: Integer32 |
Read-only |
Total number of permissible MAC move allowed on this peer. |
| ruckusBgpEvpnInstanceMacDuplicationTime
1.3.6.1.4.1.1991.1.2.18.2.1.13 Syntax: Integer32 |
Read-only |
Describes the MAC move duration on this peer. |
| ruckusBgpEvpnInstanceRowStatus
1.3.6.1.4.1.1991.1.2.18.2.1.14 Syntax: RowStatus { active(1),
notInService(2), notReady(3), createAndGo(4), createAndWait(5),
destroy(6) }
|
Read-only |
Describes the EVPN status based on the connection establishment.
The state can be,
1 - Active, 2
- notInService, 3 -
notReady, 4 -
createAndGo, 5 -
createAndWait, and 6 -
Destroy
|
| ruckusBgpEvpnInstanceRouteTargetTable
1.3.6.1.4.1.1991.1.2.18.3 Syntax: Sequence of
ruckusBgpEvpnInstanceRouteTargetEntry |
Read-only |
Describes the information on the route target per EVPN
instance. |
| ruckusBgpEvpnInstanceRouteTargetEntry
1.3.6.1.4.1.1991.1.2.18.3.1 Syntax:
ruckusBgpEvpnInstanceRouteTargetEntry |
Read-only |
Target table containing information on route target per EVPN
connection. Information about the import and export lists on this
peer. |
| ruckusBgpEvpnInstanceRouteTargetIndex
1.3.6.1.4.1.1991.1.2.18.3.1.1 Syntax: Integer32 |
Read-only |
Index pointing to the import and export lists of an instance. |
| ruckusBgpEvpnInstanceRouteTargetType
1.3.6.1.4.1.1991.1.2.18.3.1.2 Syntax: INTEGER { NOOPT(1),
IMPORT(2), EXPORT(3) } |
Read-only |
Describes if the route target type is IMPORT or EXPORT in an EVPN
instance. Values may be: 1 - NOOPT, 2 - IMPORT, or 3 -
EXPORT
|
| ruckusBgpEvpnInstanceRouteTarget
1.3.6.1.4.1.1991.1.2.18.3.1.3 Syntax: OCTET STRING |
Read-only |
Describes the route distinguisher configured in either the import or
export list. |
| ruckusBgpEvpnInstanceRouteTargetRowStatus
1.3.6.1.4.1.1991.1.2.18.3.1.4 Syntax: RowStatus {
active(1), notInService(2), notReady(3), createAndGo(4),
createAndWait(5), destroy(6) }
|
Read-only |
Information on the route target status for an EVPN instance. The
status can be:
1- active,
2 - notInService, 3 -
notReady, 4 -
createAndGo, 5 -
createAndWait, and 6 - destroy
|
| ruckusBgpEvpnBgpTable 1.3.6.1.4.1.1991.1.2.18.4 Syntax:
ruckusBgpEvpnBgpTable |
Read-only |
Information on BGP EVPN table. |
| ruckusBgpEvpnBgpLocalAS 1.3.6.1.4.1.1991.1.2.18.4.1 Syntax:
Integer32 |
Read-only |
The local autonomous system number. |
| ruckusBgpEvpnBgpPeerTable 1.3.6.1.4.1.1991.1.2.18.4.2 Syntax:
Sequence of ruckusBgpEvpnBgpPeerEntry |
Read-only |
The BGP EVPN peer table. This table contains, one entry per BGP EVPN
peer, information about the connections with BGP EVPN peers. |
| ruckusBgpEvpnBgpPeerEntry 1.3.6.1.4.1.1991.1.2.18.4.2.1 Syntax:
ruckusBgpEvpnBgpPeerEntry
|
Read-only |
Table entry containing information about the connection with a
specific BGP EVPN peer. |
| ruckusBgpEvpnBgpPeerIdentifier 1.3.6.1.4.1.1991.1.2.18.4.2.1.1
Syntax: IpAddress
|
Read-only |
The identifier of this BGP peer. This entry must be 0.0.0.0 unless
the peer state is in the openconfirm or the established state. |
| ruckusBgpEvpnBgpPeerState 1.3.6.1.4.1.1991.1.2.18.4.2.1.2
Syntax: INTEGER { idle(1), connect(2), active(3), opensent(4),
openconfirm(5), established(6) }
|
Read-only |
The BGP EVPN peer
connection state. The state can be:
1- idle,
2 - connect, 3
- active, 4 -
opensent, 5 -
openconfirm, and 6 -
established
|
| ruckusBgpEvpnBgpPeerAdminStatus
1.3.6.1.4.1.1991.1.2.18.4.2.1.3 Syntax: INTEGER{ stop(1),
start(2) }
|
Read-only |
The desired state of the BGP connection. A transition from 'stop' to
'start' causes the BGP Manual Start Event to be generated. A transition
from 'start' to 'stop' causes the BGP Manual Stop Event to be generated.
This parameter can be used to restart BGP peer connections. |
| ruckusBgpEvpnBgpPeerNegotiatedVersion
1.3.6.1.4.1.1991.1.2.18.4.2.1.4 Syntax: Integer32 |
Read-only |
The negotiated version of BGP running between the two peers. This
entry MUST be zero, unless the bgpPeerState is in the openconfirm or
the established state.
The legal values for this object are between 0 and 255.
|
| ruckusBgpEvpnBgpPeerLocalAddr
1.3.6.1.4.1.1991.1.2.18.4.2.1.5 Syntax: IpAddress |
Read-only |
The local IP address of this BGP connection entry. |
| ruckusBgpEvpnBgpPeerLocalPort
1.3.6.1.4.1.1991.1.2.18.4.2.1.6 Syntax: Integer32
(0..65535) |
Read-only |
The local port for the TCP connection between the BGP peers. |
| ruckusBgpEvpnBgpPeerRemoteAddr
1.3.6.1.4.1.1991.1.2.18.4.2.1.7 Syntax: IpAddress |
Read-only |
The remote IP address of this BGP peer entry. |
| ruckusBgpEvpnBgpPeerRemotePort
1.3.6.1.4.1.1991.1.2.18.4.2.1.8 Syntax: Integer32
(0..65535) |
Read-only |
The remote port for the TCP connection between the BGP peers. The
objects bgpPeerLocalAddr, ruckusBgpEvpnBgpPeerLocalPort,
bgpPeerRemoteAddr and ruckusBgpEvpnBgpPeerRemotePort provide the
appropriate reference to the standard MIB TCP connection table. |
| ruckusBgpEvpnBgpPeerRemoteAs 1.3.6.1.4.1.1991.1.2.18.4.2.1.9
Syntax: Integer32 |
Read-only |
The remote autonomous system number received in the BGP OPEN
message. |
| ruckusBgpEvpnBgpPeerInUpdates 1.3.6.1.4.1.1991.1.2.18.4.2.1.10
Syntax: Counter32
|
Read-only |
The number of BGP UPDATE messages received on this
connection. |
| ruckusBgpEvpnBgpPeerOutUpdates
1.3.6.1.4.1.1991.1.2.18.4.2.1.11 Syntax: Counter32 |
Read-only |
The number of BGP UPDATE messages transmitted on this
connection. |
| ruckusBgpEvpnBgpPeerInTotalMessages
1.3.6.1.4.1.1991.1.2.18.4.2.1.12 Syntax: Counter32 |
Read-only |
The total number of messages received from the remote peer on this
connection. |
| ruckusBgpEvpnBgpPeerOutTotalMessages 1.3.6.1.4.1.1991.1.2.18.4.2.1.13 Syntax:
Counter32 |
Read-only |
The total number of messages transmitted to the remote peer on this
connection. |
| ruckusBgpEvpnBgpPeerLastError
1.3.6.1.4.1.1991.1.2.18.4.2.1.14 Syntax: OCTET STRING |
Read-only |
The last error code and subcode seen by the peer on this connection.
If no error has occurred, this field is zero. Otherwise, the first byte
of this two-byte octet string contains the error code and the second
byte contains the subcode. |
| ruckusBgpEvpnBgpPeerFsmEstablishedTransitions
1.3.6.1.4.1.1991.1.2.18.4.2.1.15 Syntax: Counter32
|
Read-only |
The total number of times the BGP FSM transitioned into the
established state for this peer. |
| ruckusBgpEvpnBgpPeerFsmEstablishedTime
1.3.6.1.4.1.1991.1.2.18.4.2.1.16 Syntax: Gauge32
|
Read-only |
This timer indicates how long (in seconds) this peer has been in the
established state or how long since this peer was last in the
established state. It is set to zero when a new peer is configured or
when the router is booted. |
| ruckusBgpEvpnBgpPeerConnectRetryInterval
1.3.6.1.4.1.1991.1.2.18.4.2.1.17 Syntax: Integer32
(1..65535) |
Read-only |
Time interval in seconds for the ConnectRetry timer. The suggested
value for this timer is 120 seconds. |
| ruckusBgpEvpnBgpPeerHoldTime
1.3.6.1.4.1.1991.1.2.18.4.2.1.18 Syntax: Integer32 ( 0 | 3..65535
) |
Read-only |
Time interval (in
seconds) for the hold timer established with the peer. The value of
this object is calculated by using the smallest value in
bgpPeerHoldTimeConfigured and the hold time received in the OPEN
message.
The value must be at least three seconds if it is not zero.
If the hold timer has not been established with the peer this object
must have a value of zero.
If the bgpPeerHoldTimeConfigured object has a value of zero, then
this object must have a value of zero.
|
| ruckusBgpEvpnBgpPeerKeepAlive
1.3.6.1.4.1.1991.1.2.18.4.2.1.19 Syntax: Integer32 ( 0 | 1..21845
) |
Read-only |
Time interval (in seconds) for the keep alive timer established with
the peer. The value of this object is calculated by the BGP speaker
in such a way that when compared with ruckusBgpEvpnBgpPeerHoldTime,
it has the same proportion that bgpPeerKeepAliveConfigured has when
compared with bgpPeerHoldTimeConfigured.
If the keep alive
timer has not been established with the peer, this object must have
a value of zero (0).
If the bgpPeerKeepAliveConfigured object has a value of (0), then
this object must have a value of (0).
|
| ruckusBgpEvpnBgpPeerHoldTimeConfigured 1.3.6.1.4.1.1991.1.2.18.4.2.1.20 Syntax:
Integer32 ( 0 | 3..65535 ) |
Read-only |
Time interval (in seconds) for the hold time configured with the
peer. This value is placed in an OPEN message sent to this peer by the
BGP speaker. It is compared with the hold time field in an OPEN message
received from the peer when determining the hold time (bgpPeerHoldTime)
with the peer. The
value may be zero (0), meaning the hold time is not configured for
this peer, or 3 to 65535, inclusive. The suggested value
for this timer is 90 seconds.
|
| ruckusBgpEvpnBgpPeerKeepAliveConfigured
1.3.6.1.4.1.1991.1.2.18.4.2.1.21 Syntax: Integer32 ( 0 |
1..21845 ) |
Read-only |
Time interval (in seconds) for the keepalive timer configured for
this BGP speaker with this peer. The value of this object determines the
frequency of KEEPALIVE messages relative to the value specified in
ruckusBgpEvpnBgpPeerHoldTimeConfigured. The actual time
interval for the KEEPALIVE messages is indicated by
bgpPeerKeepAlive. A reasonable maximum
value for this timer would be one third of that of
ruckusBgpEvpnBgpPeerHoldTimeConfigured. If the value of this
object is zero (0), no periodical KEEPALIVE messages are sent to the
peer after the BGP connection has been established. The suggested value
for this timer is 30 seconds.
|
| ruckusBgpEvpnBgpPeerMinASOriginationInterval
1.3.6.1.4.1.1991.1.2.18.4.2.1.22 Syntax: Integer32
(1..65535) |
Read-only |
Time interval (in seconds) for the MinASOriginationInterval timer.
The suggested value for this timer is 15 seconds. |
| ruckusBgpEvpnBgpPeerMinRouteAdvertisementInterval
1.3.6.1.4.1.1991.1.2.18.4.2.1.23 Syntax: Integer32
(1..65535) |
Read-only |
Time interval (in seconds) for the MinRouteAdvertisementInterval
timer. The suggested value for this timer is 30 seconds for EBGP
connections and 5 seconds for IBGP connections. |
| ruckusBgpEvpnBgpPeerInUpdateElapsedTime
1.3.6.1.4.1.1991.1.2.18.4.2.1.24 Syntax: Gauge32 |
Read-only |
Elapsed time (in seconds) since the last BGP UPDATE message was
received from the peer. Each time bgpPeerInUpdates is incremented, the
value of this object is set to zero (0). |
| ruckusBgpEvpnBgpPeerSendCommunity
1.3.6.1.4.1.1991.1.2.18.4.2.1.25 Syntax: Integer32 |
Read-only |
Describes the send
community either as standard or extended or both.
The values are: 1 -
standard, 2
-Extended, and 3 -
Both
|
| ruckusBgpEvpnBgpPeerRouteReflectorClient
1.3.6.1.4.1.1991.1.2.18.4.2.1.26 Syntax: Integer32 |
Read-only |
Describes the route reflector client state. The values are:
1 - Enable, and 2 -
Disable
|
| ruckusBgpEvpnBgpPeerUpdateSourceConfigured
1.3.6.1.4.1.1991.1.2.18.4.2.1.27 Syntax: Integer32 |
Read-only |
Describes the updated source configuration on this peer. |
| ruckusBgpEvpnBgpPeerUpdateSourceIntf
1.3.6.1.4.1.1991.1.2.18.4.2.1.28 Syntax:
InterfaceIndexOrZero |
Read-only |
Describes the interface with update source configured. |
| ruckusBgpEvpnBgpPeerMacIpAdvRouteCount
1.3.6.1.4.1.1991.1.2.18.4.2.1.29 Syntax: Integer32 |
Read-only |
Provides the total number of EVPN Type 2 (MAC/IP Advertisement)
routes sent to this peer. |
| ruckusBgpEvpnBgpPeerMacImetRouteCount
1.3.6.1.4.1.1991.1.2.18.4.2.1.30 Syntax: Integer32 |
Read-only |
Provides the total number of EVPN Type 3 (Inclusive Multicast
Ethernet Tag [IMET]) routes sent to this peer. |
| ruckusBgpEvpnBgpTotalNbrCount 1.3.6.1.4.1.1991.1.2.18.4.3
Syntax: Integer32 |
Read-only |
Provides the total number of peer connections on this EVPN
instance. |
| ruckusBgpEvpnBgpEstablishedNbrCount 1.3.6.1.4.1.1991.1.2.18.4.4 Syntax:
Integer32 |
Read-only |
Total number of established peer connections. |
| ruckusBgpEvpnBgpMacIpAdvertisementRouteCount
1.3.6.1.4.1.1991.1.2.18.4.5 Syntax: Integer32 |
Read-only |
Total number of MAC/IP Advertisement Type 2 routes established. |
| ruckusBgpEvpnBgpImetRouteCount
1.3.6.1.4.1.1991.1.2.18.4.6 Syntax: Integer32 |
Read-only |
Total number of IMET Type 3 routes established. |