Note: You must configure the log adjacency command under
the "router ospf" mode to see traps for the following objects: ospfIfStateChange
trap,
ospfNbrStateChange trap, ospfVirtIfStateChange trap, and ospfVirtNbrStateChange
trap.
Trap name and number
Varbinds
Severity
Description and trap message
snTrapOspfIfStateChange
1.3.6.1.2.1.14.16.2.3
snOspfRouterId (The originator of the trap)
snOspfIfStatusIpAddress
snOspfIfStatusState (The new state)
Informational
There has been a change in the state of a non-virtual OSPF interface. This trap should
be generated when the interface state regresses (for example, goes from Dr to Down)
or progresses to a terminal state (for example, Point-to-Point, DR Other, Dr, or Backup).
Note: You must configure the
log adjacency
command under the "router ospf" mode to see traps.
Sample trap message:
OSPF router id <snOspfRouterId>, interface <snOspfIfStatusIpAddress> state changed
to <snOspfIfStatusState>.
snTrapOspfVirtIfStateChange
1.3.6.1.2.1.14.16.2.4
snOspfRouterId (The originator of the trap)
snOspfVirtIfStatusAreaID
snOspfVirtIfStatusNeighbor
snOspfVirtIfStatusState (The new state)
Informational
There has been a change in the state of an OSPF virtual interface. This trap should
be generated when the interface state regresses (for example, goes from Point-to-Point
to Down) or progresses to a terminal state (for example, Point-to-Point).
Note: You must configure the
log adjacency
command under the "router ospf" mode to see traps.
Sample trap message:
OSPF router id <snOspfRouterId>, virtual interface area id <snOspfVirtIfStatusAreaID>
neighbor <snOspfVirtIfStatusNeighbor> state changed to <snOspfVirtIfStatusState>.
snOspfIfConfigError
1.3.6.1.2.1.14.16.2.7
snOspfRouterId (The originator of the trap)
snOspfIfStatusIpAddress
snOspfPacketSrc (The source IP address)
snOspfConfigErrorType (Type of error)
snOspfPacketType
Major
A packet has been received on a non-virtual interface from a router whose configuration
parameters conflict with this router’s configuration parameters.
Note: The optionMismatch event should cause a trap only if it prevents an adjacency from
forming.
Sample trap message:
Configuration error type <snOspfConfigErrorType> with packet type <snOspfPacketType>
has been received on interface <snOspfIfStatusIpAddress>, router id <snOspfRouterId>
from <snOspfPacketSrc> .
snOspfVirtIfConfigError
1.3.6.1.2.1.14.16.2.8
snOspfRouterId (The originator of the trap)
snOspfVirtIfStatusAreaID
snOspfVirtIfStatusNeighbor
snOspfConfigErrorType (Type of error)
snOspfPacketType
Major
A packet has been received on a virtual interface from a router whose configuration
parameters conflict with this router’s configuration parameters.
Note: The optionMismatch event should cause a trap only if it prevents an adjacency from
forming.
Sample trap message:
Configuration error type <snOspfConfigErrorType> with packet type <snOspfPacketType>
has been received on virtual interface area id <snOspfVirtIfStatusAreaID>, router
id <snOspfRouterId> from neighbor <snOspfVirtIfStatusNeighbor>.
snOspfIfAuthFailure
1.3.6.1.2.1.14.16.2.9
snOspfRouterId (The originator of the trap)
snOspfIfStatusIpAddress
snOspfPacketSrc (The source IP address)
snOspfConfigErrorType (authTypeMismatch or authFailure
snOspfPacketType
Minor
A packet has been received on a non-virtual interface from a router whose authentication
key or authentication type conflicts with this router’s authentication key or authentication
type.
Sample trap message:
OSPF authentication failed. Router ID <snOspfRouterId>, Interface <snOspfIfStatusIpAddress>,
packet src <snOspfPacketSrc>, error type <snOspfConfigErrorType> and packet type <snOspfPacketType>.
snOspfVirtIfAuthFailure
1.3.6.1.2.1.14.16.2.10
snOspfRouterId (The originator of the trap)
snOspfVirtIfStatusAreaID
snOspfVirtIfStatusNeighbor
snOspfConfigErrorType (authTypeMismatch or authFailure)
snOspfPacketType
Minor
A packet has been received on a virtual interface from a router whose authentication
key or authentication type conflicts with this router’s authentication key or authentication
type.
Sample trap message:
OSPF
authentication failed. Router ID <snOspfRouterId>, virtual
interface <snOspfVirtIfStatusAreaID>, Neighbor
<snOspfVirtIfStatusNeighbor>, Error type
<snOspfConfigErrorType> and packet type
<snOspfPacketType>.
snOspfIfRxBadPacket
1.3.6.1.2.1.14.16.2.11
snOspfRouterId (The originator of the trap)
snOspfIfStatusIpAddress
snOspfPacketSrc (The source IP address)
snOspfPacketType
Warning
An OSPF packet has been received on a non-virtual interface that cannot be parsed.
Sample trap message:
OSPF Router Id <snOspfRouterId>, interface <snOspfIfStatusIpAddress> receive bad packet
(type <snOspfPacketType>) from <snOspfPacketSrc>.
snOspfVirtIfRxBadPacket
1.3.6.1.2.1.14.16.2.12
snOspfRouterId (The originator of the trap)
snOspfVirtIfStatusAreaID
snOspfVirtIfStatusNeighbor
snOspfPacketType
Warning
An OSPF packet has been received on a virtual interface that cannot be parsed.
Sample trap message:
OSPF router id <snOspfRouterId>, virtual interface <snOspfVirtIfStatusAreaID> received
bad packet (type <snOspfPacketType>) from neighbor <snOspfVirtIfStatusNeighbor>.
snOspfTxRetransmit
1.3.6.1.2.1.14.16.2.13
snOspfRouterId (The originator of the trap)
snOspfIfStatusIpAddress
snOspfNbrRtrId (Destination)
snOspfPacketType
snOspfLsdbType
snOspfLsdbLsId
snOspfLsdbRouterId
Warning
An OSPF packet has been retransmitted on a non-virtual interface. All packets that
may be retransmitted are associated with an LSDB entry. The LS type, LS ID, and Router
ID are used to identify the LSDB entry.
Sample trap message:
OSPF router id <snOspfRouterId> interface <snOspfIfStatusIpAddress> retransmitted
packet type <snOspfPacketType>,LSDB type <snOspfLsdbType>, LSDB LS ID <snOspfLsdbLsId>
and LSDB router id <snOspfLsdbRouterId> to Neighbor router id <snOspfNbrRtrId>.
ospfVirtIfTxRetransmit
1.3.6.1.2.1.14.16.2.14
snOspfRouterId (The originator of the trap)
snOspfVirtIfStatusAreaID
snOspfVirtIfStatusNeighbor
snOspfPacketType
snOspfLsdbType
snOspfLsdbLsId
snOspfLsdbRouterId
Warning
An OSPF packet has been retransmitted on a virtual interface. All packets that may
be retransmitted are associated with an LSDB entry. The LS type, LS ID, and Router
ID are used to identify the LSDB entry.
Sample trap message:
OSPF router id <snOspfRouterId>, virtual interface area id snOspfVirtIfStatusAreaID>
retransmitted packet type <snOspfPacketType>,LSDB type <snOspfLsdbType>, LSDB LS ID
<snOspfLsdbLsId> and LSDB router id <snOspfLsdbRouterId> to Neighbor <snOspfVirtIfStatusNeighbor>.
snOspfOriginateLsa
1.3.6.1.2.1.14.16.2.15
snOspfRouterId (The originator of the trap)
snOspfLsdbAreaId (0.0.0.0 for AS Externals)
snOspfLsdbType
snOspfLsdbLsId
snOspfLsdbRouterId
Informational
This router originated a new LSA. This trap should
not be invoked for simple refreshes of LSAs (which happens every 30
minutes), but instead will only be invoked when an LSA is
re-originated due to a topology change. Additionally, this trap does
not include LSAs that are being flushed because they have reached
MaxAge.
Sample trap message:
New LSA (area id <snOspfLsdbAreaId>, type <snOspfLsdbType>, LS Id <snOspfLsdbLsId>
and router id <snOspfLsdbRouterId>) has been originated by router id <snOspfRouterId> .
snOspfMaxAgeLsa
1.3.6.1.2.1.14.16.2.16
snOspfRouterId (The originator of the trap)
snOspfLsdbAreaId (0.0.0.0 for AS Externals)
snOspfLsdbType
snOspfLsdbLsId
snOspfLsdbRouterId
Warning
One of the LSAs in the router’s link-state database has aged to MaxAge.
Sample trap message:
The LSA (area id <snOspfLsdbAreaId>, type <snOspfLsdbType>, LS Id <snOspfLsdbLsId>
and router id <snOspfLsdbRouterId>) in router id <snOspfRouterId> link-state database
has aged to maximum age.
snOspfLsdbOverflow
1.3.6.1.2.1.14.16.2.17
snOspfRouterId (The originator of the trap)
snOspfExtLsdbLimit
Warning
The number of LSAs in the router’s link-state database has exceeded the ospfExtLsdbLimit.
Sample trap message:
The number of LSAs in the OSPF router id <snOspfRouterId> link-state database has
exceeded <snOspfExtLsdbLimit>.
snOspfLsdbApproachingOverflow
1.3.6.1.2.1.14.16.2.18
snOspfRouterId (The originator of the trap)
snOspfExtLsdbLimit
Informational
The number of LSAs in the router’s link-state database has exceeded 90 percent of
the ospfExtLsdbLimit.
Sample trap message:
The number of LSAs in the OSPF router id <snOspfRouterId> link-state database has
exceeded ninety percent of <snOspfExtLsdbLimit>.