RFC 4293: Management Information Base for the Internet Protocol (IP)

RFC 4293, Management Information Base for the Internet Protocol (IP) obsoletes the following:

  • RFC 2011: SNMPv2 Management Information Base for the Internet Protocol using SMIv2
  • RFC 2465: Management Information Base for IP Version 6: Textual Conventions and General Group
  • RFC 2466: Management Information Base for IP Version 6: ICMPv6 Group

The following table summarizes the tables from the RFC that are supported.

Object group name

Object identifier

Supported IP version

Access

IP scalar variables

1.3.6.1.2.1.4

IPv4 and IPv6

Only the following objects have read-write access:

  • ipDefaultTTL
  • ipv6IpDefaultHopLimit
  • ipv6IpForwarding

All other scalar variables are read-only.

Note: GET operation is not supported on the RUCKUS FastIron devices for the ipv6InterfaceTableLastChange scalar object.
ipAddrTable

1.3.6.1.2.1.4.20

 IPv4 and IPv6 The table of addressing information relevant to this entity's IP addresses.
Note: This table has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by the ipAddressTable although several objects that were not deemed useful were not carried forward while another (ipAdEntReasmMaxSize) was moved to the ipv4InterfaceTable.
ipCidrRouteTable 1.3.6.1.2.1.4.24.4 IPv4 and IPv6

This entity's IP Routing table. This table has been deprecated in favor of the IP version neutral inetCidrRouteTable.
inetCidrRouteTable 1.3.6.1.2.1.4.24.7 IPv4 and IPv6 This entity's IP Routing table.
ipv6InterfaceTable

1.3.6.1.2.1.4.30

IPv6

The table containing per-interface IPv6-specific information

All objects are read-only.

ipv6InterfaceEntry 1.3.6.1.2.1.4.30.1 IPv6 An entry containing IPv6-specific information for a given interface

Objects are not-accessible.
ipv6InterfaceEnableStatus

Syntax: Integer

 1.3.6.1.2.1.4.30.1.5 IPv6 Read-write

Possible values:

up(1)

down(2)

The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack. The IF-MIB should be used to control the state of the interface.

When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
ipNetToPhysicalTable 1.3.6.1.2.1.4.35    
ipSystemStatsTable
ipIfStatsTableLastChange

Syntax: TimeStamp

1.3.6.1.2.1.4.31.2

IPv4 and IPv6

All objects are read-only.

ipAddressPrefixTable 1.3.6.1.2.1.4.32 IPv4 and IPv6

All objects are read-only.

ipAddressTable

1.3.6.1.2.1.4.34

IPv4 and IPv6

All objects are read-only.

ipAddressEntry 1.3.6.1.2.1.4.34.1

IPv4 and IPv6

All objects are read-only.

icmp

1.3.6.1.2.1.5

IPv4 and IPv6

 
icmpStatsTable 1.3.6.1.2.1.5.29  

All objects are read-only.

icmpMsgStatsTable 1.3.6.1.2.1.5.30  

All objects are read-only.

tcp 1.3.6.1.2.1.6

IPv4 and IPv6

 
tcpConnTable 1.3.6.1.2.1.6.13

IPv4

 
tcpConnectionTable 1.3.6.1.2.1.6.19

IPv4 and IPv6

 
tcpListenerTable 1.3.6.1.2.1.6.20

IPv4 and IPv6

All objects are read-only.

udp 1.3.6.1.2.1.7

IPv4 and IPv6

 
udpTable 1.3.6.1.2.1.7.5

IPv4

All objects are read-only.

udpEndpointTable 1.3.6.1.2.1.7.7

IPv4 and IPv6

Not-accessible
Parent topic: Supported Standard MIBs