| snStackingConfigUnitTable 1.3.6.1.4.1.1991.1.1.3.31.2.1
|
None
|
The stacking configuration table.
|
| snStackingConfigUnitIndex 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1 Syntax: Integer
|
None
|
The ID of the unit in a stack.
|
| snStackingConfigUnitPriority 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2 Syntax: Integer32
|
Read-write
|
The priority in active or backup election.
Value can be from 0 through 255.
|
| snStackingConfigUnitConfigStackPort 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3 Syntax:
InterfaceIndex
|
Read-write
|
Not supported beginning release 08.0.90.
The IfIndex for the configured stacking port. If no stacking port is configured, this
object displays zero and the first two 10 Gigabit ports as the default stacking ports.
Enter zero to remove the configured stacking port.
|
| snStackingConfigUnitRowStatus 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4 Syntax: Integer
|
Read-write
|
This object is used to delete a row in the table and control if they are used. The
following values can be written for a SET:
- delete(3) - Deletes the row. Deleted rows are deleted immediately.
The following values can be returned on reads:
- noSuchName - No such row
- other(1) - Some other cases
- valid(2) - The row exists and is valid
|
| snStackingConfigUnitType 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5 Syntax: DisplayString
|
Read-only
|
A description of the configured or active system type for each unit.
|
| snStackingConfigUnitState 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6 Syntax: Integer
|
Read-only
|
The state of the unit:
- local(1)
- remote(2)
- reserved(3)
- empty(4)
|
| snStackingConfigUnitStackPort1 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7 Syntax:
InterfaceIndex
|
Read-write
|
First stack port for each unit. It returns 0 if the stack port does not exist.
|
| snStackingConfigUnitStackPort2 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8 Syntax:
InterfaceIndex or zero
|
Read-write
|
Second stack port for each unit. It returns 0 if the stack port does not exist.
|
| snStackingConfigUnitStackTrunk1 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.11 Syntax: Octet String
|
Read-write
|
A list of interface indices which are the port membership of a stack trunk on unit.
Each interface index is a 32-bit integer in big endian order. It returns NULL if stack
trunk does not exist.
Entering an empty octet string means to delete this stack trunk.
Note that the maximum stack trunk on a unit is 2. Each stack trunk contains up to
16 ports.
|
| snStackingConfigUnitStackTrunk2 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.12 Syntax: Octet String
|
Read-write
|
A list of interface indices which are the port membership of a stack trunk on unit.
Each interface index is a 32-bit integer in big endian order. It returns NULL if stack
trunk does not exist.
Entering empty octet string means to delete this stack trunk.
Note that the maximum stack trunk on an unit is 2. Each stack trunk contains up to
16 ports.
|
| snStackingConfigUnitName 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.13 Syntax: DisplayString
(Size 0 - 64)
|
Read-write
|
A name description of stacking unit.
|