| snPortProfile 1.3.6.1.4.1.1991.1.1.3.50
|
Not-accessible |
Port profile objects. |
| snSwPortProfileTable 1.3.6.1.4.1.1991.1.1.3.50.1
|
Not-accessible |
A table containing port profile entries. |
| snSwPortProfileEntry 1.3.6.1.4.1.1991.1.1.3.50.1.1
|
Not-accessible |
An entry in the port profile table. |
| snSwPortProfileName 1.3.6.1.4.1.1991.1.1.3.50.1.1.1 Syntax:
DisplayString
|
Read-write |
Name of the port profile. |
snSwDhcpSnoopingTrust 1.3.6.1.4.1.1991.1.1.3.50.1.1.2Syntax:
TruthValue
|
Read-write |
Enable DHCP snooping for the port profile. |
| snSwDot1x 1.3.6.1.4.1.1991.1.1.3.50.1.1.3 Syntax:
TruthValue
|
Read-write |
Enable IEEE 802.1x for the port profile. |
|
snSwEgressAcl 1.3.6.1.4.1.1991.1.1.3.50.1.1.4
Syntax: DisplayString
|
Read-write |
Egress ACL for the port profile. |
| snSwIngressAcl 1.3.6.1.4.1.1991.1.1.3.50.1.1.5 Syntax:
DisplayString
|
Read-write |
Ingress ACL for the port profile. |
| snSwIpsg 1.3.6.1.4.1.1991.1.1.3.50.1.1.6 Syntax:
TruthValue
|
Read-write |
Set IP Source Guard for the port profile. |
| snSwLldpDevNameAndDesc
1.3.6.1.4.1.1991.1.1.3.50.1.1.7 Syntax:
DisplayString
|
Read-write |
Set LLDP device system name for the port profile. |
| snSwMacOui 1.3.6.1.4.1.1991.1.1.3.50.1.1.8 Syntax:
DisplayString
|
Read-write |
Set MAC-OUI for the port profile. |
|
snSwMacAuth
1.3.6.1.4.1.1991.1.1.3.50.1.1.9
Syntax: TruthValue
|
Read-write |
Enable MAC authentication for the port profile. |
|
snSwPoeClass
1.3.6.1.4.1.1991.1.1.3.50.1.1.10
Syntax: Integer
|
Read-write |
Set the PoE class for the port profile. |
| snPoeEnable 1.3.6.1.4.1.1991.1.1.3.50.1.1.11 Syntax:
TruthValue
|
Read-write |
Enable PoE for the port profile. |
| snSwPortPrioPoePriority 1.3.6.1.4.1.1991.1.1.3.50.1.1.12 Syntax:
Integer
|
Read-write |
PoE priority for the port profile. |
| snSwPortPrioritySpeed
1.3.6.1.4.1.1991.1.1.3.50.1.1.13 Syntax:
DisplayString
|
Read-write |
Describes the current bandwidth of an interface in bits per second.
For interfaces with a fixed bandwidth or when an accurate estimation is
not possible, this value should reflect the nominal bandwidth. If the
interface's bandwidth exceeds the maximum value reportable by this
object, the object should report the maximum value (4,294,967,295) and
ifHighSpeed must be used to report the interface's speed. For a
sub-layer that does not have a concept of bandwidth, this object should
have a value of zero. |
| snSwPorts 1.3.6.1.4.1.1991.1.1.3.50.1.1.14 Syntax:
DisplayString
|
Read-write |
The Interface Index for port access entry. |
| snSwProtectedPort 1.3.6.1.4.1.1991.1.1.3.50.1.1.15 Syntax:
TruthValue
|
Read-write |
Enable protected port for the port profile. |
| snSwRadius 1.3.6.1.4.1.1991.1.1.3.50.1.1.16 Syntax:
IpAddress
|
Read-write |
RADIUS for the port profile. |
| snSwRstpAdminEdgePort 1.3.6.1.4.1.1991.1.1.3.50.1.1.17 Syntax:
TruthValue
|
Read-write |
Enable RSTP admin edge port for the port profile. |
| snSwStpBpduGuard 1.3.6.1.4.1.1991.1.1.3.50.1.1.18 Syntax:
TruthValue
|
Read-write |
Enable STP BPDU guard for the port profile. |
| snSwStpRootGuard 1.3.6.1.4.1.1991.1.1.3.50.1.1.19 Syntax:
TruthValue
|
Read-write |
Enable STP root guard for the port profile. |
| snSwTaggedVlans 1.3.6.1.4.1.1991.1.1.3.50.1.1.20 Syntax:
Integer
|
Read-write |
Tagged VLAN for the port profile. |
| snSwUntaggedVlan 1.3.6.1.4.1.1991.1.1.3.50.1.1.21 Syntax:
Integer
|
Read-write |
Untagged VLAN for the port profile. |
| snSwPortProfileRowStatus 1.3.6.1.4.1.1991.1.1.3.50.1.1.22 Syntax:
Integer
|
Read-write |
To create or delete a port profile table entry. The values are: 1-other 2-valid 3-delete 4-create 5-modify
|
| snSwLldpDevNameBeginAndDesc 1.3.6.1.4.1.1991.1.1.3.50.1.1.23 Syntax:
DisplayString
|
Read-write |
Set LLDP device system name begin and description of the port
profile. |
| snSwLldpDevNameIncludeAndDesc
1.3.6.1.4.1.1991.1.1.3.50.1.1.24 Syntax:
DisplayString
|
Read-write |
Set LLDP device system name include and description of the port
profile. |