| traceRouteCtlOwnerIndex
Syntax: SnmpAdminString (SIZE(0..32))
|
None
|
This first index for the entry in traceRouteCtlTable. The value is textually mapped
to a securityName or groupName defined in VACM. The value is not validated against
the SNMPv3 users configured in the device. It will be used for index purpose only.
|
| traceRouteCtlTestName
Syntax: SnmpAdminString (SIZE(0..32))
|
None
|
The name of the traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex.
|
| traceRouteHopsHopIndex
Syntax: Unsigned32 (1..'ffffffff'h)
|
None
|
Specifies the hop index for a traceroute hop. Values for this object with respect
to the same traceRouteCtlOwnerIndex and traceRouteCtlTestName must start at 1 and
be given increasing values for subsequent hops. The value of traceRouteHopsHopIndex
is not necessarily the number of the hop on the traced path.
All hops (traceRouteHopsTable entries) in a traceroute path MUST be updated at the
same time when a traceroute operation is completed.
|
| traceRouteHopsIpTgtAddressType
Syntax: InetAddressType
|
Read-only
|
Indicates the type of address stored in the corresponding traceRouteHopsIpTgtAddress
object.
|
| traceRouteHopsIpTgtAddress
Syntax: InetAddress
|
Read-only
|
IP address associated with the hop. A value for this object should be reported as
a numeric IP address, not as a DNS name.
|
| traceRouteHopsMinRtt
Syntax: Unsigned32
|
Read-only
|
The minimum traceroute round-trip-time (RTT) received for this hop. A value of 0
for this object implies that no RTT has been received.
|
| traceRouteHopsMaxRtt
Syntax: Unsigned32
|
Read-only
|
The maximum traceroute round-trip-time (RTT) received for this hop. A value of 0
for this object implies that no RTT has been received.
|
| traceRouteHopsAverageRtt
Syntax: Unsigned32
|
Read-only
|
The current average traceroute round-trip-time (RTT) for this hop.
|
| traceRouteHopsRttSumOfSquares
Syntax: Unsigned32
|
Read-only
|
This object contains the sum of the squares of all round-trip-times received for
this hop. Its purpose is to enable standard deviation calculation.
|
| traceRouteHopsSentProbes
Syntax: Unsigned32
|
Read-only
|
The value of this object reflects the number of probes sent for this hop during this
traceroute test. The value of this object starts at 0.
|
| traceRouteHopsProbeResponses
Syntax: Unsigned32
|
Read-only
|
Number of responses received for this hop during this traceroute test. This value
of this object starts at 0.
|
| traceRouteHopsLastGoodProbe
Syntax: Unsigned32
|
DateAndTime
|
Date and time at which the last response was received for a probe for this hop during
this traceroute test.
|