Configuring Telnet Remote Access

Remote access using Telnet can be enabled, and related access parameters can be configured.
When accessing the device CLI using Telnet the following can be configured.
  • Telnet idle time
  • Number of failed Telnet logins
  1. Enter global configuration mode. 
    device# configure terminal
  2. (Optional) If Telnet is disabled, enable Telnet. 
    device(config)# telnet server
    To prevent users from accessing the CLI of the device across the network, Telnet can be disabled.
  3. Configure the Telnet idle time. 
    device(config)# telnet timeout 120
    The timeout for an inactive Telnet session is set to 120 minutes. After 120 minutes of inactivity, the session is disconnected.
  4. Configure the number of login attempts for Telnet access. 
    device(config)# telnet login-retries 5
    After 5 failed login attempts, the ICX device disconnects the Telnet session.
Parent topic: Remote Access Configuration Using Telnet