Displaying Port Profile Information

You can display information for all registered port profiles.
  1. To display information for all the port profile configurations, enter the show port-profile command. 
    device# show port-profile

      Interface            Profile           Type
  =====================================================
    Ethernet 1/1/5         profile1          static

    Ethernet 1/1/12        profile2         dynamic
    The example shows that two port profiles are configured.
  2. To display information for entries based on a specific interface, enter the show port-profile ethernet command. 
    device# show port-profile ethernet 1/1/12

      Interface            Profile         Type
  ==============================
    Ethernet 1/1/12         profile        dynamic
  3. To display information for a specific port profile, enter the show port-profile profile command. 
    device# show port-profile profile profile1

    Interface                Profile           Type
  =============================
    Ethernet 1/1/5           profile1          static
  4. To display information for configured port profiles based on profile type, enter the show port-profile type command.
    device# show port-profile type static

    Interface              Profile           Type
  ============================
    Ethernet 1/1/5         profile1          static
  5. To display information for the MAC-OUI entry, enter the show port-profile-mac-oui command.
    device# show port-profile-mac-oui 

MAC-OUI             Profile             Interface 
================================================================================== 
F8:E7:1E         MAC_Oui-F8:E7:1E            1/1/12
  6. To display information for the LLDP entry, enter the show port-profile-lldp command.
     device# show port-profile-lldp
 
   Interface               Profile           System Name       System Description    
  ==================================================================================  
     Ethernet 1/1/12        RUCKUS            RUCKUS                 RUCKUS
  7. To display the details of the configuration applied to interfaces through a port-profile, enter the show port-profile-config command in global configuration mode.
    device(config)# show port-profile-config

vlan 111 by port
 tagged ethe 1/1/12 
!
vlan 112 by port
 untagged ethe 1/1/12 
!
vlan 113 by port
 tagged ethe 1/1/12 
!
!
interface ethernet 1/1/12
 protected-port enable
 lldp-device system-name "RUCKUS" system-desc "RUCKUS"
 ip access-group ing_filt in
exclude-ports ethernet 1/2/2:2
  8. The following command displays the LLDP entry system name and description that includes a specific pattern.
    device(config-port-profile-RUCKUS_AP)# show lldp neighbors  detail ports  ethernet  1/1/12  | inc System
  + System name         : "RUCKUS"
  + System description  : "RUCKUS"
  + System capabilities : bridge, WLAN access point, router
Parent topic: Port Profile