Modifying system parameter default values
Information for the configurable tables appears under the columns that are shown in bold type in the above examples. To simplify configuration, the command parameter you enter to configure the table is used for the table name. For example, to increase the capacity of the IP route table, enter the following commands.
device(config)# system-max ip-route 120000 device(config)# write memory device(config)# exit device# reload
Note: If you accidentally enter a value that is not within the valid range of values, the
CLI will display the valid range for you.
To increase the number of IP subnet interfaces you can configure on each port on a device running Layer 3 code from 24 to 64, enter the following commands.
device(config)# system-max ip-subnet-port 64 device(config)# write memory device(config)# exit device# reload