Disabling LLDP receive and transmit mode

To disable the receipt and transmission of LLDP packets on individual ports, enter a command such as the following at the Global CONFIG level of the CLI.
  1. Enter the configure terminal command to access global configuration mode. 
    device# configure terminal
  2. Enter the below commands to stop the ports to transmit and receive LLDP packets. 
    device(config)#no lldp enable ports e 1/2/4 e 1/2/5

The following task stops the ports to transmit and receive LLDP packets. 

device# configure terminal
device(config)#no lldp enable ports e 1/2/4 e 1/2/5
Parent topic: LLDP Configuration