Enabling Configuration Archive Auto-Revert Options

The following task configures various options for configuration archive auto-revert. Using these commands is optional and they can be entered in any order. If any of the following commands is not entered, the default is applied after configuration archive auto-revert is enabled.
  1. Configure a specified golden archive to be used when reloading the system instead of the startup configuration.
    device(config)# cfg-archive revert-option archive 10
  2. Display the configured automatic revert timer.
    device(config)# cfg-archive revert-option auto-revert-timer

Revert option timer : 1 minute(s) 0 second(s)
  3. Set the automatic revert timer interval to ten minutes.
    device(config)# cfg-archive revert-option auto-revert-timer 10
  4. Display the configured partition that is used when using configuration archive auto-revert.
    device(config)# cfg-archive revert-option boot-partition
Boot Partition : Primary
  5. Specify that the secondary partition be used when auto-reverting.
    device(config)# cfg-archive revert-option boot-partition sec
  6. Display the configured confirm wait timer.
    device(config)# cfg-archive revert-option confirm-wait-timer

Confirm wait timer : 1 minute(s) 0 second(s)
  7. Set the confirm wait timer to ten minutes.
    device(config)# cfg-archive revert-option confirm-wait-timer 10

New Confirm wait timer : 10 minute(s) 0 second(s)
  8. Specify that a reload is automatically initiated after the configured wait time expires.
    device(config)# cfg-archive revert-option confirm-wait-type auto
  9. Specify that the golden archive is updated with the latest running configuration.
    device(config)#device# cfg-archive revert-option update-archive-content
Parent topic: Configuration Archive and Replace