Configuring a Forwarding Profile

Complete the following steps to change a forwarding profile. The following example configures the predefined forwarding profile “profile2” for an ICX 7850 device. The default forwarding profile "profile1" is overwritten and the maximum system (system-max) parameters are reset.
  1. Use the configure terminal command to enter global configuration mode. 
    device# configure terminal
  2. Enter the forwarding-profile command with the profile2 keyword to change the forwarding profile from the default. 
    device(config)# forwarding-profile profile2

Perform a write mem and reload for profile2 profile to take effect
    After using the forwarding-profile command, you must use the write-memory and reload commands to place the change into effect.

The following example configures the predefined non-default forwarding profile “profile2” for an ICX 7850 device. 

ICX7850# configure terminal
ICX7850(config)# forwarding-profile profile2

Perform a write mem and reload for profile2 profile to take effect

The following example configures the default forwarding profile “profile1” for an ICX 7850 device if the forwarding profile “profile2” has been configured. 

ICX7850# configure terminal
device(config)# forwarding-profile profile1

Perform a write mem and reload for profile1 profile to take effect

The following example configures the predefined non-default forwarding profile “profile3” for an ICX 7850 device. 

ICX7850# configure terminal
ICX7850(config)# forwarding-profile profile3

Perform a write mem and reload for profile3 profile to take effect

The following example configures the predefined non-default forwarding profile “profile4” for an ICX 7850 device. 

ICX7850# configure terminal
ICX7850(config)# forwarding-profile profile4

Perform a write mem and reload for profile4 profile to take effect
Parent topic: Forwarding Profiles